All MIBs › CISCO-WIRELESS-P2P-BPI-MIB › cwrBpiRmAuthPrivacyEnable
cwrBpiRmAuthPrivacyEnable
Module: CISCO-WIRELESS-P2P-BPI-MIB
OID (symbolic): CISCO-WIRELESS-P2P-BPI-MIB::cwrBpiRmAuthPrivacyEnable
OID (numeric): 1.3.6.1.4.1.9.9.135.1.2.1.1.1
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: This object identifies whether the Master Radio is provisioned to use Encryption or not.
What is cwrBpiRmAuthPrivacyEnable?
This read-write object configures whether the Radio Master is provisioned to use encryption, the master-side counterpart to cwrBpiRsPrivacyEnable on the slave. Both ends of a link typically need this enabled for encrypted service to actually establish. For example, if a subscriber radio has cwrBpiRsPrivacyEnable set but encryption still doesn't negotiate, an admin would check cwrBpiRmAuthPrivacyEnable on the head-end master to confirm it's also provisioned for privacy.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.135.1.2.1.1.1 snmpwalk -v2c -c public <target> CISCO-WIRELESS-P2P-BPI-MIB::cwrBpiRmAuthPrivacyEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.135.1.2.1.1.1.1 snmpget -v2c -c public <target> CISCO-WIRELESS-P2P-BPI-MIB::cwrBpiRmAuthPrivacyEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.135.1.2.1.1.1.1 s <value>
Start monitoring Cisco point-to-point wireless bridge/backhaul radio (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-P2P-BPI-MIB::cwrBpiRmAuthPrivacyEnable OID value, configure state conditions and alerts, and monitor any Cisco point-to-point wireless bridge/backhaul radio (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.135 | ciscoWirelessP2pBpiMIB | CISCO-WIRELESS-P2P-BPI-MIB |
| 1.3.6.1.4.1.9.9.135.1 | cwrBpiMIBObjects | CISCO-WIRELESS-P2P-BPI-MIB |
| 1.3.6.1.4.1.9.9.135.1.2 | cwrBpiRmObjects | CISCO-WIRELESS-P2P-BPI-MIB |
| 1.3.6.1.4.1.9.9.135.1.2.1 | cwrBpiRmAuthTable | CISCO-WIRELESS-P2P-BPI-MIB |
| 1.3.6.1.4.1.9.9.135.1.2.1.1 | cwrBpiRmAuthEntry | CISCO-WIRELESS-P2P-BPI-MIB |
| 1.3.6.1.4.1.9.9.135.1.2.1.1.1 | cwrBpiRmAuthPrivacyEnable | CISCO-WIRELESS-P2P-BPI-MIB |