All MIBs › CISCO-WIRELESS-DOCS-EXT-MIB › cwdxQosCtrlUpMaxRsvdBWPercent
cwdxQosCtrlUpMaxRsvdBWPercent
Module: CISCO-WIRELESS-DOCS-EXT-MIB
OID (symbolic): CISCO-WIRELESS-DOCS-EXT-MIB::cwdxQosCtrlUpMaxRsvdBWPercent
OID (numeric): 1.3.6.1.4.1.9.9.169.1.1.1.1.2
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The percentage of upstream maximum reserved bandwidth to the raw bandwidth if the admission control is enabled on this upstream.
For example, if the upstream interface has raw bandwidth 1,600,000 bits/second and cwdxQosCtrlUpMaxRsvdBWPercent is 200 percent, then this upstream scheduler will set the maximum of virtual reserved bandwidth capacity to 3,200,000 bits/second (1,600,000 * 2) to serve Subscriber-units with minimum guaranteed upstream bandwidth.
The default value is 100 percent (that is, maximum reserved bandwidth is the raw bandwidth.) Whenever the admission control is changed (on to off, off to on), this value will be reset to the default value 100.
If the admission control is disabled, the value will be reset to 100 (the default value).
What is cwdxQosCtrlUpMaxRsvdBWPercent?
This read-write value sets the maximum reserved bandwidth for an upstream as a percentage of its raw bandwidth, used only when admission control is enabled. Administrators tune this to control how much of the upstream's physical capacity can be virtually reserved for guaranteed-bandwidth subscriber units. For example, as the description itself illustrates, setting cwdxQosCtrlUpMaxRsvdBWPercent to 200 percent on a 1,600,000 bits/second upstream lets the scheduler reserve up to 3,200,000 bits/second for SUs.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.169.1.1.1.1.2 snmpwalk -v2c -c public <target> CISCO-WIRELESS-DOCS-EXT-MIB::cwdxQosCtrlUpMaxRsvdBWPercent
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.169.1.1.1.1.2.1 snmpget -v2c -c public <target> CISCO-WIRELESS-DOCS-EXT-MIB::cwdxQosCtrlUpMaxRsvdBWPercent.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.169.1.1.1.1.2.1 i <value>
Start monitoring Cisco DOCSIS headend devices with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-DOCS-EXT-MIB::cwdxQosCtrlUpMaxRsvdBWPercent OID value, configure state conditions and alerts, and monitor any Cisco DOCSIS headend devices from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.169 | ciscoWirelessDocsExtMIB | CISCO-WIRELESS-DOCS-EXT-MIB |
| 1.3.6.1.4.1.9.9.169.1 | ciscoWirelessDocsExtMIBObjects | CISCO-WIRELESS-DOCS-EXT-MIB |
| 1.3.6.1.4.1.9.9.169.1.1 | cwdxQosCtrlObjects | CISCO-WIRELESS-DOCS-EXT-MIB |
| 1.3.6.1.4.1.9.9.169.1.1.1 | cwdxQosCtrlUpTable | CISCO-WIRELESS-DOCS-EXT-MIB |
| 1.3.6.1.4.1.9.9.169.1.1.1.1 | cwdxQosCtrlUpEntry | CISCO-WIRELESS-DOCS-EXT-MIB |
| 1.3.6.1.4.1.9.9.169.1.1.1.1.2 | cwdxQosCtrlUpMaxRsvdBWPercent | CISCO-WIRELESS-DOCS-EXT-MIB |