CISCO-WIRELESS-DOCS-EXT-MIB :: cwdxQosCtrlUpAdmissionCtrl

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WIRELESS-DOCS-EXT-MIBcwdxQosCtrlUpAdmissionCtrl

cwdxQosCtrlUpAdmissionCtrl

Module: CISCO-WIRELESS-DOCS-EXT-MIB

OID (symbolic): CISCO-WIRELESS-DOCS-EXT-MIB::cwdxQosCtrlUpAdmissionCtrl

OID (numeric): 1.3.6.1.4.1.9.9.169.1.1.1.1.1

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: The admission control status for this upstream entry.

When this object is set to 'true', the upstream scheduler will check the virtual reserved bandwidth remaining before giving admission to this new SU. If there is not enough reserved bandwidth to serve the SU's minimum guaranteed bandwidth, the registration request will be rejected.

This object is set to 'false' to disable admission control. That is, there will be no checking for bandwidth capacity and the upstream interface scheduler just admits SU registration requests.

What is cwdxQosCtrlUpAdmissionCtrl?

This read-write flag enables or disables admission control on this upstream interface, which, when true, makes the scheduler check remaining virtual reserved bandwidth before admitting a new subscriber unit's registration. An admin sets this to true to prevent oversubscribing an upstream's guaranteed bandwidth, or false to let all registrations through regardless of capacity. For example, an operator seeing SUs register successfully but then experience poor voice quality could enable cwdxQosCtrlUpAdmissionCtrl so future registrations are rejected once minimum guaranteed bandwidth is exhausted.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.169.1.1.1.1.1
snmpwalk -v2c -c public <target> CISCO-WIRELESS-DOCS-EXT-MIB::cwdxQosCtrlUpAdmissionCtrl

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.169.1.1.1.1.1.1
snmpget -v2c -c public <target> CISCO-WIRELESS-DOCS-EXT-MIB::cwdxQosCtrlUpAdmissionCtrl.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.169.1.1.1.1.1.1 s <value>

Start monitoring Cisco DOCSIS headend devices with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-DOCS-EXT-MIB::cwdxQosCtrlUpAdmissionCtrl OID value, configure state conditions and alerts, and monitor any Cisco DOCSIS headend devices from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.169ciscoWirelessDocsExtMIBCISCO-WIRELESS-DOCS-EXT-MIB
1.3.6.1.4.1.9.9.169.1ciscoWirelessDocsExtMIBObjectsCISCO-WIRELESS-DOCS-EXT-MIB
1.3.6.1.4.1.9.9.169.1.1cwdxQosCtrlObjectsCISCO-WIRELESS-DOCS-EXT-MIB
1.3.6.1.4.1.9.9.169.1.1.1cwdxQosCtrlUpTableCISCO-WIRELESS-DOCS-EXT-MIB
1.3.6.1.4.1.9.9.169.1.1.1.1cwdxQosCtrlUpEntryCISCO-WIRELESS-DOCS-EXT-MIB
1.3.6.1.4.1.9.9.169.1.1.1.1.1cwdxQosCtrlUpAdmissionCtrlCISCO-WIRELESS-DOCS-EXT-MIB