All MIBs › CISCO-WIRELESS-DOCS-EXT-MIB › cwdxHeSuStatusValue
cwdxHeSuStatusValue
Module: CISCO-WIRELESS-DOCS-EXT-MIB
OID (symbolic): CISCO-WIRELESS-DOCS-EXT-MIB::cwdxHeSuStatusValue
OID (numeric): 1.3.6.1.4.1.9.9.169.1.3.3.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Current Subscriber-unit connectivity state. The object extends states in cwdIfHeSuStatusValue in more detail.
The enumerations are: offline(1) : SU considered offline. others(2) : states is in cwdIfHeSuStatusValue. initRangingRcvd(3) : SU sent initial ranging. initDhcpReqRcvd(4) : dhcp request received. onlineNetAccessDisabled(5): SU registered, but network access for the SU is disabled. onlineKekAssigned(6) : SU registered, BPI enabled and KEK assigned. onlineTekAssigned(7) : SU registered, BPI enabled and TEK assigned. rejectBadMic(8) : SU did attempt to register but registration was refused due to bad mic. rejectBadCos(9) : SU did attempt to register but registration was refused due to bad COS. kekRejected(10) : KEK SU key assignment rejected. tekRejected(11) : TEK SU key assignment rejected. online(12) : SU registered, enabled for data. initTftpPacketRcvd(13): tftp packet received and option file transfer started. initTodRquestRcvd(14): Time of the Day (TOD) request received.
The ranging, rangingAborted, rangingComplete, and ipComplete states in cwdIfHeSuStatusValue are all represented by the 'others' value in this object.
The registrationComplete state in cwdIfHeSuStatusValue could be online, onlineNetAccessDisabled, onlineKekAssigned, or onlineTekAssigned in this object.
The accessDenied state in cwdIfHeSuStatusValue could be rejectBadMic, rejectBadCos in this object for the possible reasons of Subscriber-unit registration abort.
The HE only reports states it is able to detect.
What is cwdxHeSuStatusValue?
This read-only object reports the detailed connectivity state of a subscriber unit as seen by the headend, extending the coarser cwdIfHeSuStatusValue with finer-grained states such as offline, initial ranging received, DHCP request received, or online with network access disabled. Admins use this detail to pinpoint exactly where in the registration sequence an SU is stuck when it fails to come fully online. For example, an SU stuck reporting initDhcpReqRcvd(4) in cwdxHeSuStatusValue would tell an admin the device got past ranging but is failing at the DHCP stage.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.169.1.3.3.1.1 snmpwalk -v2c -c public <target> CISCO-WIRELESS-DOCS-EXT-MIB::cwdxHeSuStatusValue
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.169.1.3.3.1.1.1 snmpget -v2c -c public <target> CISCO-WIRELESS-DOCS-EXT-MIB::cwdxHeSuStatusValue.1
Start monitoring Cisco DOCSIS headend devices with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-DOCS-EXT-MIB::cwdxHeSuStatusValue OID value, configure state conditions and alerts, and monitor any Cisco DOCSIS headend devices from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.169 | ciscoWirelessDocsExtMIB | CISCO-WIRELESS-DOCS-EXT-MIB |
| 1.3.6.1.4.1.9.9.169.1 | ciscoWirelessDocsExtMIBObjects | CISCO-WIRELESS-DOCS-EXT-MIB |
| 1.3.6.1.4.1.9.9.169.1.3 | cwdxHeSuCpeObjects | CISCO-WIRELESS-DOCS-EXT-MIB |
| 1.3.6.1.4.1.9.9.169.1.3.3 | cwdxHeSuStatusExtTable | CISCO-WIRELESS-DOCS-EXT-MIB |
| 1.3.6.1.4.1.9.9.169.1.3.3.1 | cwdxHeSuStatusExtEntry | CISCO-WIRELESS-DOCS-EXT-MIB |
| 1.3.6.1.4.1.9.9.169.1.3.3.1.1 | cwdxHeSuStatusValue | CISCO-WIRELESS-DOCS-EXT-MIB |