CISCO-WAN-MODULE-MIB :: cwmStatLevelConfigured

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-WAN-MODULE-MIB › cwmStatLevelConfigured

cwmStatLevelConfigured

Module: CISCO-WAN-MODULE-MIB

OID (symbolic): CISCO-WAN-MODULE-MIB::cwmStatLevelConfigured

OID (numeric): 1.3.6.1.4.1.9.9.145.1.2.1.1.5

Node type: OBJECT-TYPE

Type: StatisticsLevel

Access: read-write

Description: This object is used to configure the statistics level for the module. The statistics level value set in this object will take effect only on reset of the module.

This object can be set only if cwmStatCollectionStatus is set to enable(1). This object cannot be set to notApplicable(0).

What is cwmStatLevelConfigured?

This read-write StatisticsLevel object configures the statistics level for the module, taking effect only after the next module reset, and per the description can only be set while cwmStatCollectionStatus is enable(1) and cannot be set to notApplicable(0). An admin uses this to stage a change in how much statistical detail the module will collect, knowing the change is deferred until a reset. Attempting to set this while collection status is disabled would fail, so an admin must enable collection first.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.145.1.2.1.1.5
snmpwalk -v2c -c public <target> CISCO-WAN-MODULE-MIB::cwmStatLevelConfigured

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.145.1.2.1.1.5.1
snmpget -v2c -c public <target> CISCO-WAN-MODULE-MIB::cwmStatLevelConfigured.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.145.1.2.1.1.5.1 s <value>

Start monitoring Cisco WAN switches (Service Modules, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-MODULE-MIB::cwmStatLevelConfigured OID value, configure state conditions and alerts, and monitor any Cisco WAN switches (Service Modules, legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.145ciscoWanModuleMIBCISCO-WAN-MODULE-MIB
1.3.6.1.4.1.9.9.145.1cwmMIBObjectsCISCO-WAN-MODULE-MIB
1.3.6.1.4.1.9.9.145.1.2cwmStatsConfigCISCO-WAN-MODULE-MIB
1.3.6.1.4.1.9.9.145.1.2.1cwmStatConfigTableCISCO-WAN-MODULE-MIB
1.3.6.1.4.1.9.9.145.1.2.1.1cwmStatConfigEntryCISCO-WAN-MODULE-MIB
1.3.6.1.4.1.9.9.145.1.2.1.1.5cwmStatLevelConfiguredCISCO-WAN-MODULE-MIB