All MIBs › CISCO-WAN-MODULE-MIB › cwmSCTFileVerCfg
cwmSCTFileVerCfg
Module: CISCO-WAN-MODULE-MIB
OID (symbolic): CISCO-WAN-MODULE-MIB::cwmSCTFileVerCfg
OID (numeric): 1.3.6.1.4.1.9.9.145.1.1.1.1.5
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: The Configured version of the Service Class Template(SCT) file. This version applies to both the card SCT and the port SCT files in a service module.
The port SCT files are specified while provisioning a port using the caviFileId field in the CISCO-WAN-VIRTUAL-IF-MIB.my MIB. The card SCT file is specifed in this MIB using the cwmIngressSCTFileName object.
The configured version of the SCT does not take effect until the service module is rebooted. However, graceful invocation of a new SCT version can be achieved by using redundant service modules. The configured SCT version is first applied on a standby service module by rebooting it. When the standby reboots, it comes up with the configured SCT version. Thereafter a switchover can be performed, making the standby SM take over as active.
What is cwmSCTFileVerCfg?
This read-write Unsigned32, ranging 0 to 65535, sets the configured version of the Service Class Template file applying to both the card SCT and port SCT files (the latter specified via caviFileId in CISCO-WAN-VIRTUAL-IF-MIB), and per the description this configured version doesn't take effect until the service module is reset. An admin sets this when staging an SCT version upgrade, knowing the change is only pending until the next module reload. Because of the reset requirement, an admin would compare this object against cwmSCTFileVerOpr to confirm whether a planned SCT version change has actually taken effect yet.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.145.1.1.1.1.5 snmpwalk -v2c -c public <target> CISCO-WAN-MODULE-MIB::cwmSCTFileVerCfg
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.145.1.1.1.1.5.1 snmpget -v2c -c public <target> CISCO-WAN-MODULE-MIB::cwmSCTFileVerCfg.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.145.1.1.1.1.5.1 i <value>
Start monitoring Cisco WAN switches (Service Modules, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-MODULE-MIB::cwmSCTFileVerCfg OID value, configure state conditions and alerts, and monitor any Cisco WAN switches (Service Modules, legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.145 | ciscoWanModuleMIB | CISCO-WAN-MODULE-MIB |
| 1.3.6.1.4.1.9.9.145.1 | cwmMIBObjects | CISCO-WAN-MODULE-MIB |
| 1.3.6.1.4.1.9.9.145.1.1 | cwmConfig | CISCO-WAN-MODULE-MIB |
| 1.3.6.1.4.1.9.9.145.1.1.1 | cwmConfigTable | CISCO-WAN-MODULE-MIB |
| 1.3.6.1.4.1.9.9.145.1.1.1.1 | cwmConfigEntry | CISCO-WAN-MODULE-MIB |
| 1.3.6.1.4.1.9.9.145.1.1.1.1.5 | cwmSCTFileVerCfg | CISCO-WAN-MODULE-MIB |