All MIBs › CISCO-VOIP-TAP-MIB › cvoiptapStreamCapabilities
cvoiptapStreamCapabilities
Module: CISCO-VOIP-TAP-MIB
OID (symbolic): CISCO-VOIP-TAP-MIB::cvoiptapStreamCapabilities
OID (numeric): 1.3.6.1.4.1.9.9.716.1.1.1
Node type: OBJECT-TYPE
Type: Bits
Access: read-only
Description: This object identifies what types of intercept streams can be configured on this type of device. This may be dependent on hardware capabilities, software capabilities. The following fields may be supported: tapEnable: set if table entries with cTap2StreamInterceptEnable set to 'false' are used to pre-screen packets for intercept otherwise these entries are ignored. usernameOrNumber: SNMP ifIndex value may be used to select interception of calls to or from a user or phone number may be used to select traffic to be intercepted. uri: Session Initiation Protocol (SIP) Uniform Resource Identifier (URI) may be used to select traffic to be intercepted.
What is cvoiptapStreamCapabilities?
This read-only BITS object identifies which types of intercept streams (tapEnable, usernameOrNumber, uri) can be configured on this device, reflecting underlying hardware and software capabilities. Administrators, particularly those responsible for lawful intercept compliance, check this to confirm which intercept matching methods a given device actually supports before attempting to provision a tap. For example, before configuring a lawful intercept warrant that matches by SIP URI, an admin would verify this object includes the uri bit to confirm the device supports that matching method.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.716.1.1.1 snmpwalk -v2c -c public <target> CISCO-VOIP-TAP-MIB::cvoiptapStreamCapabilities
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.716.1.1.1.1 snmpget -v2c -c public <target> CISCO-VOIP-TAP-MIB::cvoiptapStreamCapabilities.1
Start monitoring Cisco VoIP gateway/call-control platform (lawful intercept) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VOIP-TAP-MIB::cvoiptapStreamCapabilities OID value, configure state conditions and alerts, and monitor any Cisco VoIP gateway/call-control platform (lawful intercept) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.716 | ciscoVoIpTapMIB | CISCO-VOIP-TAP-MIB |
| 1.3.6.1.4.1.9.9.716.1 | ciscoVoIpTapMIBObjects | CISCO-VOIP-TAP-MIB |
| 1.3.6.1.4.1.9.9.716.1.1 | cvoiptapStreamEncodePacket | CISCO-VOIP-TAP-MIB |
| 1.3.6.1.4.1.9.9.716.1.1.1 | cvoiptapStreamCapabilities | CISCO-VOIP-TAP-MIB |