All MIBs › CISCO-VOICE-CARD-MIB › cVoiceCardCodecComplexity
cVoiceCardCodecComplexity
Module: CISCO-VOICE-CARD-MIB
OID (symbolic): CISCO-VOICE-CARD-MIB::cVoiceCardCodecComplexity
OID (numeric): 1.3.6.1.4.1.9.9.300576.1.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Determines whether the voice ports in the card can support all codecs or not. Medium complexity configuration can not support all codecs, while High Complexity configuration supports all codecs. The card may support all types of codecs listed, but the NMS setting a value will force the card only to use the codecs limited by the Codec Complexity configured.
What is cVoiceCardCodecComplexity?
This is a read-write setting that toggles the voice card between medium complexity, which supports only a limited set of codecs, and high complexity, which supports the full range of codecs the card is capable of. An admin configures this because setting medium complexity trades away some codec flexibility, typically to support more simultaneous voice channels per card. For example, a busy gateway might be set to medium complexity to pack more calls onto each card, accepting that some higher-quality codecs become unavailable.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.300576.1.1.1.3 snmpwalk -v2c -c public <target> CISCO-VOICE-CARD-MIB::cVoiceCardCodecComplexity
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.300576.1.1.1.3.1 snmpget -v2c -c public <target> CISCO-VOICE-CARD-MIB::cVoiceCardCodecComplexity.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.300576.1.1.1.3.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cVoiceCardCodecComplexity.1
Start monitoring Cisco voice-enabled routers with voice interface cards with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VOICE-CARD-MIB::cVoiceCardCodecComplexity OID value, configure state conditions and alerts, and monitor any Cisco voice-enabled routers with voice interface cards from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.300576 | ciscoVoiceCard | CISCO-VOICE-CARD-MIB |
| 1.3.6.1.4.1.9.9.300576.1 | ciscoVoiceCardObjects | CISCO-VOICE-CARD-MIB |
| 1.3.6.1.4.1.9.9.300576.1.1 | cVoiceCardTable | CISCO-VOICE-CARD-MIB |
| 1.3.6.1.4.1.9.9.300576.1.1.1 | cVoiceCardEntry | CISCO-VOICE-CARD-MIB |
| 1.3.6.1.4.1.9.9.300576.1.1.1.3 | cVoiceCardCodecComplexity | CISCO-VOICE-CARD-MIB |