CISCO-VOICE-ANALOG-IF-MIB :: cvaIfFXSCfgSignalType

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-VOICE-ANALOG-IF-MIBcvaIfFXSCfgSignalType

cvaIfFXSCfgSignalType

Module: CISCO-VOICE-ANALOG-IF-MIB

OID (symbolic): CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSCfgSignalType

OID (numeric): 1.3.6.1.4.1.9.9.62.1.4.1.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: the signaling type of FXS interface. fxsLoopStart - loop start. fxsGroundStart - ground start.

What is cvaIfFXSCfgSignalType?

This read-write INTEGER selects the FXS interface's signaling type: fxsLoopStart or fxsGroundStart. An administrator sets this to match the signaling expected by the analog phone or PBX line connected to this FXS port. For example, selecting fxsLoopStart(1) configures the port for standard loop-start signaling typical of most residential analog phones.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.62.1.4.1.1.1
snmpwalk -v2c -c public <target> CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSCfgSignalType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.62.1.4.1.1.1.1
snmpget -v2c -c public <target> CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSCfgSignalType.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.62.1.4.1.1.1.1 i <value>

Start monitoring Cisco ISR/voice gateways with analog FXS/FXO/E&M interfaces with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSCfgSignalType OID value, configure state conditions and alerts, and monitor any Cisco ISR/voice gateways with analog FXS/FXO/E&M interfaces from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.62ciscoVoiceAnalogIfMIBCISCO-VOICE-ANALOG-IF-MIB
1.3.6.1.4.1.9.9.62.1cvaIfObjectsCISCO-VOICE-ANALOG-IF-MIB
1.3.6.1.4.1.9.9.62.1.4cvaIfFXSObjectsCISCO-VOICE-ANALOG-IF-MIB
1.3.6.1.4.1.9.9.62.1.4.1cvaIfFXSCfgTableCISCO-VOICE-ANALOG-IF-MIB
1.3.6.1.4.1.9.9.62.1.4.1.1cvaIfFXSCfgEntryCISCO-VOICE-ANALOG-IF-MIB
1.3.6.1.4.1.9.9.62.1.4.1.1.1cvaIfFXSCfgSignalTypeCISCO-VOICE-ANALOG-IF-MIB