All MIBs › CISCO-VOICE-ANALOG-IF-MIB › cvaIfFXOCfgSupDisconnect2
cvaIfFXOCfgSupDisconnect2
Module: CISCO-VOICE-ANALOG-IF-MIB
OID (symbolic): CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXOCfgSupDisconnect2
OID (numeric): 1.3.6.1.4.1.9.9.62.1.3.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Specifies the type of supervisory disconnect signal (CPC) to be presented to the interface when the connected party at the interface hangs up. signal - power denial recognition anytone - tone detection of all call progressing tones dualtoneMidcall - tone detection to operate throughout the call duration dualtonePreconnect - tone detection to operate only during call setup
What is cvaIfFXOCfgSupDisconnect2?
This read-write INTEGER selects the specific type of supervisory disconnect (CPC) detection method used on the FXO interface: signal (power denial recognition), anytone (detects all call progress tones), dualtoneMidcall, or dualtonePreconnect. An administrator chooses this based on which disconnect detection mechanism the connected telephone line actually supports. For example, selecting anytone(1) configures the interface to recognize any call-progress tone as an indication the far end has disconnected.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.62.1.3.1.1.5 snmpwalk -v2c -c public <target> CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXOCfgSupDisconnect2
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.62.1.3.1.1.5.1 snmpget -v2c -c public <target> CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXOCfgSupDisconnect2.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.62.1.3.1.1.5.1 i <value>
Start monitoring Cisco ISR/voice gateways with analog FXS/FXO/E&M interfaces with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXOCfgSupDisconnect2 OID value, configure state conditions and alerts, and monitor any Cisco ISR/voice gateways with analog FXS/FXO/E&M interfaces from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.62 | ciscoVoiceAnalogIfMIB | CISCO-VOICE-ANALOG-IF-MIB |
| 1.3.6.1.4.1.9.9.62.1 | cvaIfObjects | CISCO-VOICE-ANALOG-IF-MIB |
| 1.3.6.1.4.1.9.9.62.1.3 | cvaIfFXOObjects | CISCO-VOICE-ANALOG-IF-MIB |
| 1.3.6.1.4.1.9.9.62.1.3.1 | cvaIfFXOCfgTable | CISCO-VOICE-ANALOG-IF-MIB |
| 1.3.6.1.4.1.9.9.62.1.3.1.1 | cvaIfFXOCfgEntry | CISCO-VOICE-ANALOG-IF-MIB |
| 1.3.6.1.4.1.9.9.62.1.3.1.1.5 | cvaIfFXOCfgSupDisconnect2 | CISCO-VOICE-ANALOG-IF-MIB |