CISCO-VOICE-ANALOG-IF-MIB :: cvaIfEMInSeizureActive

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-VOICE-ANALOG-IF-MIBcvaIfEMInSeizureActive

cvaIfEMInSeizureActive

Module: CISCO-VOICE-ANALOG-IF-MIB

OID (symbolic): CISCO-VOICE-ANALOG-IF-MIB::cvaIfEMInSeizureActive

OID (numeric): 1.3.6.1.4.1.9.9.62.1.2.2.1.1

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-only

Description: This object contains the incoming seizure state of the E&M interface. If the value is true, then the interface has an incoming trunk seizure active; otherwise, it doesn't.

What is cvaIfEMInSeizureActive?

This read-only TruthValue indicates whether the E&M interface currently has an incoming trunk seizure active, meaning true reflects an active incoming seizure and false does not. An administrator checks this to see in real time whether the far end has seized the trunk to initiate an inbound call. For example, this object reading true would confirm an inbound call is currently in the process of being set up on that E&M trunk.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.62.1.2.2.1.1
snmpwalk -v2c -c public <target> CISCO-VOICE-ANALOG-IF-MIB::cvaIfEMInSeizureActive

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.62.1.2.2.1.1.1
snmpget -v2c -c public <target> CISCO-VOICE-ANALOG-IF-MIB::cvaIfEMInSeizureActive.1

Start monitoring Cisco ISR/voice gateways with analog FXS/FXO/E&M interfaces with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VOICE-ANALOG-IF-MIB::cvaIfEMInSeizureActive OID value, configure state conditions and alerts, and monitor any Cisco ISR/voice gateways with analog FXS/FXO/E&M interfaces from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.62ciscoVoiceAnalogIfMIBCISCO-VOICE-ANALOG-IF-MIB
1.3.6.1.4.1.9.9.62.1cvaIfObjectsCISCO-VOICE-ANALOG-IF-MIB
1.3.6.1.4.1.9.9.62.1.2cvaIfEMObjectsCISCO-VOICE-ANALOG-IF-MIB
1.3.6.1.4.1.9.9.62.1.2.2cvaIfEMStatusTableCISCO-VOICE-ANALOG-IF-MIB
1.3.6.1.4.1.9.9.62.1.2.2.1cvaIfEMStatusEntryCISCO-VOICE-ANALOG-IF-MIB
1.3.6.1.4.1.9.9.62.1.2.2.1.1cvaIfEMInSeizureActiveCISCO-VOICE-ANALOG-IF-MIB