All MIBs › CISCO-VOICE-ANALOG-IF-MIB › cvaIfEMCfgDialType
cvaIfEMCfgDialType
Module: CISCO-VOICE-ANALOG-IF-MIB
OID (symbolic): CISCO-VOICE-ANALOG-IF-MIB::cvaIfEMCfgDialType
OID (numeric): 1.3.6.1.4.1.9.9.62.1.2.1.1.4
Node type: OBJECT-TYPE
Type: InterfaceDialType
Access: read-write
Description: Specifies the out dialing type of E&M interface.
What is cvaIfEMCfgDialType?
This read-write InterfaceDialType value specifies the out-dialing method used on the E&M interface. An administrator sets this to match the dialing method (such as DTMF or pulse) expected by the far-end equipment connected to the E&M trunk. For example, choosing a DTMF dial type ensures outbound digits are sent as tones rather than pulses on that E&M interface.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.62.1.2.1.1.4 snmpwalk -v2c -c public <target> CISCO-VOICE-ANALOG-IF-MIB::cvaIfEMCfgDialType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.62.1.2.1.1.4.1 snmpget -v2c -c public <target> CISCO-VOICE-ANALOG-IF-MIB::cvaIfEMCfgDialType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.62.1.2.1.1.4.1 s <value>
Start monitoring Cisco ISR/voice gateways with analog FXS/FXO/E&M interfaces with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VOICE-ANALOG-IF-MIB::cvaIfEMCfgDialType OID value, configure state conditions and alerts, and monitor any Cisco ISR/voice gateways with analog FXS/FXO/E&M interfaces from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.62 | ciscoVoiceAnalogIfMIB | CISCO-VOICE-ANALOG-IF-MIB |
| 1.3.6.1.4.1.9.9.62.1 | cvaIfObjects | CISCO-VOICE-ANALOG-IF-MIB |
| 1.3.6.1.4.1.9.9.62.1.2 | cvaIfEMObjects | CISCO-VOICE-ANALOG-IF-MIB |
| 1.3.6.1.4.1.9.9.62.1.2.1 | cvaIfEMCfgTable | CISCO-VOICE-ANALOG-IF-MIB |
| 1.3.6.1.4.1.9.9.62.1.2.1.1 | cvaIfEMCfgEntry | CISCO-VOICE-ANALOG-IF-MIB |
| 1.3.6.1.4.1.9.9.62.1.2.1.1.4 | cvaIfEMCfgDialType | CISCO-VOICE-ANALOG-IF-MIB |