All MIBs › CISCO-VOICE-AALX-PROFILE-MIB › cvapSvcMultiCIDOriginatDelTimer
cvapSvcMultiCIDOriginatDelTimer
Module: CISCO-VOICE-AALX-PROFILE-MIB
OID (symbolic): CISCO-VOICE-AALX-PROFILE-MIB::cvapSvcMultiCIDOriginatDelTimer
OID (numeric): 1.3.6.1.4.1.9.9.323.1.3.1.1.16
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This object specifies the time to wait to delete an Originated -SVC in the case where a CID delete just occurred and the SVC has no more CIDs after the deletion. The interval of this object should be 5. The 'cvapSvcMultiCIDOriginatDelTimer' must be greater than or equal to 'cvapSvcMultiCIDTerminatDelTimer+5', except for the case that 'cvapSvcMultiCIDOriginatDelTimer' is 0 and 'cvapSvcMultiCIDTerminatDelTimer' is 0 (which means that the Delete Timer feature is disabled).
What is cvapSvcMultiCIDOriginatDelTimer?
This read-write Unsigned32 (0 to 1200 seconds) sets how long the gateway waits to delete an Originated Multi-CID SVC after its last CID has been deleted, and must be at least 5 seconds greater than cvapSvcMultiCIDTerminatDelTimer unless both are zero. An administrator tunes this to avoid tearing down and rebuilding SVCs too aggressively when CIDs churn on and off. For example, setting a longer originate delete timer keeps an empty SVC alive briefly in case a new CID is about to be added.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.323.1.3.1.1.16 snmpwalk -v2c -c public <target> CISCO-VOICE-AALX-PROFILE-MIB::cvapSvcMultiCIDOriginatDelTimer
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.323.1.3.1.1.16.1 snmpget -v2c -c public <target> CISCO-VOICE-AALX-PROFILE-MIB::cvapSvcMultiCIDOriginatDelTimer.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.323.1.3.1.1.16.1 i <value>
Start monitoring Cisco voice gateways/routers (voice over ATM) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VOICE-AALX-PROFILE-MIB::cvapSvcMultiCIDOriginatDelTimer OID value, configure state conditions and alerts, and monitor any Cisco voice gateways/routers (voice over ATM) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.323 | ciscoVoiceAalxProfileMIB | CISCO-VOICE-AALX-PROFILE-MIB |
| 1.3.6.1.4.1.9.9.323.1 | ciscoVoiceAalxProfileMIBObjects | CISCO-VOICE-AALX-PROFILE-MIB |
| 1.3.6.1.4.1.9.9.323.1.3 | cvapSvcConfig | CISCO-VOICE-AALX-PROFILE-MIB |
| 1.3.6.1.4.1.9.9.323.1.3.1 | cvapSvcConfigTable | CISCO-VOICE-AALX-PROFILE-MIB |
| 1.3.6.1.4.1.9.9.323.1.3.1.1 | cvapSvcConfigEntry | CISCO-VOICE-AALX-PROFILE-MIB |
| 1.3.6.1.4.1.9.9.323.1.3.1.1.16 | cvapSvcMultiCIDOriginatDelTimer | CISCO-VOICE-AALX-PROFILE-MIB |