All MIBs › CISCO-VOICE-AALX-PROFILE-MIB › cvapSvcAtmQosClr
cvapSvcAtmQosClr
Module: CISCO-VOICE-AALX-PROFILE-MIB
OID (symbolic): CISCO-VOICE-AALX-PROFILE-MIB::cvapSvcAtmQosClr
OID (numeric): 1.3.6.1.4.1.9.9.323.1.3.1.1.3
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: This object identifies maximum Cell Loss Ratio (CLR) in voice SVC establishment. It is used to guarantee the quality of the route selected for a voice SVC. It is applicable to both AAL1 and AAL2 SVC connection establishment. This value is sent in voice SVC setup messages in extended quality of services information element as maximum cell loss ratio value.
What is cvapSvcAtmQosClr?
This read-write Integer32 (4 to 8) sets the maximum Cell Loss Ratio value sent in the extended QoS information element during voice SVC setup, applicable to both AAL1 and AAL2 connections. An administrator uses this to specify how much cell loss (expressed as this coded value) is tolerable for the quality of the route selected for a voice call. For example, choosing a stricter (lower) CLR value demands a higher-quality ATM path be used for that voice SVC.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.323.1.3.1.1.3 snmpwalk -v2c -c public <target> CISCO-VOICE-AALX-PROFILE-MIB::cvapSvcAtmQosClr
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.323.1.3.1.1.3.1 snmpget -v2c -c public <target> CISCO-VOICE-AALX-PROFILE-MIB::cvapSvcAtmQosClr.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.323.1.3.1.1.3.1 i <value>
Start monitoring Cisco voice gateways/routers (voice over ATM) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VOICE-AALX-PROFILE-MIB::cvapSvcAtmQosClr OID value, configure state conditions and alerts, and monitor any Cisco voice gateways/routers (voice over ATM) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.323 | ciscoVoiceAalxProfileMIB | CISCO-VOICE-AALX-PROFILE-MIB |
| 1.3.6.1.4.1.9.9.323.1 | ciscoVoiceAalxProfileMIBObjects | CISCO-VOICE-AALX-PROFILE-MIB |
| 1.3.6.1.4.1.9.9.323.1.3 | cvapSvcConfig | CISCO-VOICE-AALX-PROFILE-MIB |
| 1.3.6.1.4.1.9.9.323.1.3.1 | cvapSvcConfigTable | CISCO-VOICE-AALX-PROFILE-MIB |
| 1.3.6.1.4.1.9.9.323.1.3.1.1 | cvapSvcConfigEntry | CISCO-VOICE-AALX-PROFILE-MIB |
| 1.3.6.1.4.1.9.9.323.1.3.1.1.3 | cvapSvcAtmQosClr | CISCO-VOICE-AALX-PROFILE-MIB |