CISCO-VOICE-AALX-PROFILE-MIB :: cvapCodecConfigVbdPacketPeriod

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-VOICE-AALX-PROFILE-MIBcvapCodecConfigVbdPacketPeriod

cvapCodecConfigVbdPacketPeriod

Module: CISCO-VOICE-AALX-PROFILE-MIB

OID (symbolic): CISCO-VOICE-AALX-PROFILE-MIB::cvapCodecConfigVbdPacketPeriod

OID (numeric): 1.3.6.1.4.1.9.9.323.1.1.2.1.5

Node type: OBJECT-TYPE

Type: CiscoCodecPacketPeriod

Access: read-write

Description: This object specifies the packetization period for a particular CODEC in VBD (Voice Band Data) upspeed. The packetization period represents the time for the media gateway to collect the data from TDM side before it sends out the packet.

This object is not applicable if cvapCodecConfigAdaptType is set to 'aal2(4)' since the packetization period for a CODEC in VoATM with AAL2 depends on the associated profile.

What is cvapCodecConfigVbdPacketPeriod?

This read-write CiscoCodecPacketPeriod value, measured in microseconds, specifies the packetization period used specifically for Voice Band Data (VBD) upspeed with a given CODEC, again not applicable when adaptation is aal2. An administrator adjusts this separately from the voice packet period to tune fax or modem-over-IP performance distinct from regular voice traffic. For example, a shorter VBD packet period could reduce latency for a fax relay session riding the same CODEC configuration.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.323.1.1.2.1.5
snmpwalk -v2c -c public <target> CISCO-VOICE-AALX-PROFILE-MIB::cvapCodecConfigVbdPacketPeriod

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.323.1.1.2.1.5.1
snmpget -v2c -c public <target> CISCO-VOICE-AALX-PROFILE-MIB::cvapCodecConfigVbdPacketPeriod.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.323.1.1.2.1.5.1 s <value>

Start monitoring Cisco voice gateways/routers (voice over ATM) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VOICE-AALX-PROFILE-MIB::cvapCodecConfigVbdPacketPeriod OID value, configure state conditions and alerts, and monitor any Cisco voice gateways/routers (voice over ATM) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.323ciscoVoiceAalxProfileMIBCISCO-VOICE-AALX-PROFILE-MIB
1.3.6.1.4.1.9.9.323.1ciscoVoiceAalxProfileMIBObjectsCISCO-VOICE-AALX-PROFILE-MIB
1.3.6.1.4.1.9.9.323.1.1cvapCodecConfigCISCO-VOICE-AALX-PROFILE-MIB
1.3.6.1.4.1.9.9.323.1.1.2cvapCodecConfigTableCISCO-VOICE-AALX-PROFILE-MIB
1.3.6.1.4.1.9.9.323.1.1.2.1cvapCodecConfigEntryCISCO-VOICE-AALX-PROFILE-MIB
1.3.6.1.4.1.9.9.323.1.1.2.1.5cvapCodecConfigVbdPacketPeriodCISCO-VOICE-AALX-PROFILE-MIB