All MIBs › CISCO-VOICE-AALX-PROFILE-MIB › cvapCodecConfigPayloadType
cvapCodecConfigPayloadType
Module: CISCO-VOICE-AALX-PROFILE-MIB
OID (symbolic): CISCO-VOICE-AALX-PROFILE-MIB::cvapCodecConfigPayloadType
OID (numeric): 1.3.6.1.4.1.9.9.323.1.1.2.1.11
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This object specifies the payload type of the CODEC in voice application as specified in RFC1890.
The values (0..95) are static payload type. The values (96..127) are dynamic payload type and it is specified dynamically through the control protocol during call setup.
If more than one CODEC have the same payload type, the CODEC with the highest preference (the lowest value of cvapCodecConfigPreference) will be selected.
What is cvapCodecConfigPayloadType?
This read-write Unsigned32 (0 to 127) sets the RTP payload type used for this CODEC per RFC 1890, where values 0-95 are static and 96-127 are dynamically negotiated during call setup. An administrator assigns this so gateways and endpoints correctly identify which CODEC a given RTP stream is carrying. For example, if two CODECs share the same payload type, the one with the lower cvapCodecConfigPreference value takes precedence during selection.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.323.1.1.2.1.11 snmpwalk -v2c -c public <target> CISCO-VOICE-AALX-PROFILE-MIB::cvapCodecConfigPayloadType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.323.1.1.2.1.11.1 snmpget -v2c -c public <target> CISCO-VOICE-AALX-PROFILE-MIB::cvapCodecConfigPayloadType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.323.1.1.2.1.11.1 i <value>
Start monitoring Cisco voice gateways/routers (voice over ATM) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VOICE-AALX-PROFILE-MIB::cvapCodecConfigPayloadType OID value, configure state conditions and alerts, and monitor any Cisco voice gateways/routers (voice over ATM) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.323 | ciscoVoiceAalxProfileMIB | CISCO-VOICE-AALX-PROFILE-MIB |
| 1.3.6.1.4.1.9.9.323.1 | ciscoVoiceAalxProfileMIBObjects | CISCO-VOICE-AALX-PROFILE-MIB |
| 1.3.6.1.4.1.9.9.323.1.1 | cvapCodecConfig | CISCO-VOICE-AALX-PROFILE-MIB |
| 1.3.6.1.4.1.9.9.323.1.1.2 | cvapCodecConfigTable | CISCO-VOICE-AALX-PROFILE-MIB |
| 1.3.6.1.4.1.9.9.323.1.1.2.1 | cvapCodecConfigEntry | CISCO-VOICE-AALX-PROFILE-MIB |
| 1.3.6.1.4.1.9.9.323.1.1.2.1.11 | cvapCodecConfigPayloadType | CISCO-VOICE-AALX-PROFILE-MIB |