All MIBs › CISCO-VOICE-AALX-PROFILE-MIB › cvapCodecConfigJitterNomDelay
cvapCodecConfigJitterNomDelay
Module: CISCO-VOICE-AALX-PROFILE-MIB
OID (symbolic): CISCO-VOICE-AALX-PROFILE-MIB::cvapCodecConfigJitterNomDelay
OID (numeric): 1.3.6.1.4.1.9.9.323.1.1.2.1.8
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This object specifies the nominal jitter buffer size.
If cvapCodecConfigJitterDelayMode is set to fixed(2), the jitter buffer is fixed at this value for the duration of the call.
if cvapCodecConfigJitterDelayMode is set to adaptive(1), the jitter buffer is initially set to this value.
The value of cvapCodecConfigJitterNomDelay needs to be greater than or equal to the value of cvapCodecConfigJitterMinDelay and be smaller than or equal to the value of cvapCodecConfigJitterMaxDelay.
What is cvapCodecConfigJitterNomDelay?
This read-write Unsigned32 (5 to 500 milliseconds) sets the nominal jitter buffer size, used as the fixed constant value in fixed mode or as the DSP's starting point in adaptive mode, and must fall between the configured min and max delays. An administrator tunes this as the baseline latency-versus-smoothness tradeoff for voice calls on this profile. For example, setting the nominal delay to 60ms establishes that as the buffer size for fixed-mode calls on this CODEC.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.323.1.1.2.1.8 snmpwalk -v2c -c public <target> CISCO-VOICE-AALX-PROFILE-MIB::cvapCodecConfigJitterNomDelay
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.323.1.1.2.1.8.1 snmpget -v2c -c public <target> CISCO-VOICE-AALX-PROFILE-MIB::cvapCodecConfigJitterNomDelay.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.323.1.1.2.1.8.1 i <value>
Start monitoring Cisco voice gateways/routers (voice over ATM) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VOICE-AALX-PROFILE-MIB::cvapCodecConfigJitterNomDelay OID value, configure state conditions and alerts, and monitor any Cisco voice gateways/routers (voice over ATM) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.323 | ciscoVoiceAalxProfileMIB | CISCO-VOICE-AALX-PROFILE-MIB |
| 1.3.6.1.4.1.9.9.323.1 | ciscoVoiceAalxProfileMIBObjects | CISCO-VOICE-AALX-PROFILE-MIB |
| 1.3.6.1.4.1.9.9.323.1.1 | cvapCodecConfig | CISCO-VOICE-AALX-PROFILE-MIB |
| 1.3.6.1.4.1.9.9.323.1.1.2 | cvapCodecConfigTable | CISCO-VOICE-AALX-PROFILE-MIB |
| 1.3.6.1.4.1.9.9.323.1.1.2.1 | cvapCodecConfigEntry | CISCO-VOICE-AALX-PROFILE-MIB |
| 1.3.6.1.4.1.9.9.323.1.1.2.1.8 | cvapCodecConfigJitterNomDelay | CISCO-VOICE-AALX-PROFILE-MIB |