CISCO-STACK-MIB :: tacacsLocalEnableAuthentication

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-STACK-MIBtacacsLocalEnableAuthentication

tacacsLocalEnableAuthentication

Module: CISCO-STACK-MIB

OID (symbolic): CISCO-STACK-MIB::tacacsLocalEnableAuthentication

OID (numeric): 1.3.6.1.4.1.9.5.1.16.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Indicates whether the enable authentication using local password is enabled or disabled for Console session and/or Telnet sessions.

Setting this object to enabled(1),the enable authentication using local password is enabled for both telnet and console sessions.

Setting this object to disabled(2), the enable authentication using local password is disabled for both telnet and console sessions.

Setting this object to enabledForTelnetOnly(3), the enable authentication using local password is enabled only for telnet sessions, but disabled for console sessions.

Setting this object to enabledForConsoleOnly(4), the enable authentication using local password is enabled only for console sessions, but disabled for telnet sessions.

This object is deprecated and replaced by cacPriorityTable in CISCO-AAA-CLIENT-MIB.

What is tacacsLocalEnableAuthentication?

Indicates whether enable (privileged mode) authentication using a locally configured password is enabled or disabled for console and/or telnet sessions.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.5.1.16.4
snmpwalk -v2c -c public <target> CISCO-STACK-MIB::tacacsLocalEnableAuthentication

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.5.1.16.4.1
snmpget -v2c -c public <target> CISCO-STACK-MIB::tacacsLocalEnableAuthentication.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.5.1.16.4.1 i <value>

Start monitoring Cisco Catalyst switch (legacy/mid-generation) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-STACK-MIB::tacacsLocalEnableAuthentication OID value, configure state conditions and alerts, and monitor any Cisco Catalyst switch (legacy/mid-generation) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.5workgroupCISCO-ES-STACK-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.5.1ciscoStackMIBCISCO-STACK-MIB
1.3.6.1.4.1.9.5.1.16tacacsGrpCISCO-STACK-MIB
1.3.6.1.4.1.9.5.1.16.4tacacsLocalEnableAuthenticationCISCO-STACK-MIB