CISCO-STACK-MIB :: tacacsEnableAuthentication

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-STACK-MIBtacacsEnableAuthentication

tacacsEnableAuthentication

Module: CISCO-STACK-MIB

OID (symbolic): CISCO-STACK-MIB::tacacsEnableAuthentication

OID (numeric): 1.3.6.1.4.1.9.5.1.16.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Indicates whether the enable authentication using the TACACS+ feature is enabled or disabled for console sessions and/or telnet sessions based on the value.

Setting this object to enabled(1), the enable authentication using the TACACS+ feature is enabled for both telnet and console sessions.

Setting this object to disabled(2), the enable authentication using the TACACS+ feature is disabled for both telnet and console sessions.

Setting this object to enabledForTelnetOnly(3), the enable authentication using the TACACS+ feature is enabled only for telnet sessions, but disabled for console sessions.

Setting this object to enabledForConsoleOnly(4), the enable authentication using the TACACS+ feature is enabled only for console sessions, but disabled for telnet sessions.

This object is deprecated and replaced by cacPriorityTable in CISCO-AAA-CLIENT-MIB.

What is tacacsEnableAuthentication?

Indicates whether TACACS+-based enable (privileged mode) authentication is enabled or disabled for console and/or telnet sessions.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.5.1.16.2
snmpwalk -v2c -c public <target> CISCO-STACK-MIB::tacacsEnableAuthentication

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.5.1.16.2.1
snmpget -v2c -c public <target> CISCO-STACK-MIB::tacacsEnableAuthentication.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.5.1.16.2.1 i <value>

Start monitoring Cisco Catalyst switch (legacy/mid-generation) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-STACK-MIB::tacacsEnableAuthentication OID value, configure state conditions and alerts, and monitor any Cisco Catalyst switch (legacy/mid-generation) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.5workgroupCISCO-ES-STACK-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.5.1ciscoStackMIBCISCO-STACK-MIB
1.3.6.1.4.1.9.5.1.16tacacsGrpCISCO-STACK-MIB
1.3.6.1.4.1.9.5.1.16.2tacacsEnableAuthenticationCISCO-STACK-MIB