CISCO-STACK-MIB :: sysStartupConfigSourceFile

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-STACK-MIBsysStartupConfigSourceFile

sysStartupConfigSourceFile

Module: CISCO-STACK-MIB

OID (symbolic): CISCO-STACK-MIB::sysStartupConfigSourceFile

OID (numeric): 1.3.6.1.4.1.9.5.1.1.51

Node type: OBJECT-TYPE

Type: DisplayString

Access: read-write

Description: Indicates which configuration file(s) on the flash device will be used during the next system startup. If the value of this MIB object contains one or multiple valid configuration file(s), then the valid configuration file(s) will reconfigure the system during the next system startup one by one in the order specified. If the value of this MIB object does not contain the valid configuration file(s) on the device, the NVRAM configuration will be used instead. For supervisor models wsx5540 and wsx5550, only 'cfg1' and 'cfg2' are valid file names. For supervisor models with the flash file system support, the valid file name has the format of '[;...]'. This MIB object is only supported in systems with supervisor models wsx5540 and wsx5550 or supervisor models with the flash file system support.

What is sysStartupConfigSourceFile?

Read-write setting naming which configuration file(s) on the flash device are used the next time the system starts up.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.5.1.1.51
snmpwalk -v2c -c public <target> CISCO-STACK-MIB::sysStartupConfigSourceFile

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.5.1.1.51.1
snmpget -v2c -c public <target> CISCO-STACK-MIB::sysStartupConfigSourceFile.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.5.1.1.51.1 s <value>

Start monitoring Cisco Catalyst switch (legacy/mid-generation) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-STACK-MIB::sysStartupConfigSourceFile OID value, configure state conditions and alerts, and monitor any Cisco Catalyst switch (legacy/mid-generation) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.5workgroupCISCO-ES-STACK-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.5.1ciscoStackMIBCISCO-STACK-MIB
1.3.6.1.4.1.9.5.1.1systemGrpCISCO-STACK-MIB
1.3.6.1.4.1.9.5.1.1.51sysStartupConfigSourceFileCISCO-STACK-MIB