All MIBs › CISCO-STACK-MIB › sysStandbyPortEnable
sysStandbyPortEnable
Module: CISCO-STACK-MIB
OID (symbolic): CISCO-STACK-MIB::sysStandbyPortEnable
OID (numeric): 1.3.6.1.4.1.9.5.1.1.53
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Indicates whether the standby port feature is enabled or not. If this object is set to enabled(1), the uplink ports on the standby supervisor module are activated; otherwise, the uplink ports on the standby supervisor remain inactive.
What is sysStandbyPortEnable?
Read-write switch that enables or disables the uplink ports on a standby supervisor module (the standby port feature).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.5.1.1.53 snmpwalk -v2c -c public <target> CISCO-STACK-MIB::sysStandbyPortEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.5.1.1.53.1 snmpget -v2c -c public <target> CISCO-STACK-MIB::sysStandbyPortEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.5.1.1.53.1 i <value>
Start monitoring Cisco Catalyst switch (legacy/mid-generation) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-STACK-MIB::sysStandbyPortEnable OID value, configure state conditions and alerts, and monitor any Cisco Catalyst switch (legacy/mid-generation) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.5 | workgroup | CISCO-ES-STACK-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.5.1 | ciscoStackMIB | CISCO-STACK-MIB |
| 1.3.6.1.4.1.9.5.1.1 | systemGrp | CISCO-STACK-MIB |
| 1.3.6.1.4.1.9.5.1.1.53 | sysStandbyPortEnable | CISCO-STACK-MIB |