All MIBs › CISCO-STACK-MIB › sysEnableStpxTrap
sysEnableStpxTrap
Module: CISCO-STACK-MIB
OID (symbolic): CISCO-STACK-MIB::sysEnableStpxTrap
OID (numeric): 1.3.6.1.4.1.9.5.1.1.40
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Indicates whether stpxInconsistencyUpdate, stpxRootInconsistencyUpdate and stpxLoopInconsistencyUpdate notifications in CISCO-STP-EXTENSIONS-MIB should be generated.
enabled -- the stpxInconsistencyUpdate, stpxRootInconsistencyUpdate and stpxLoopInconsistencyUpdate traps are all enabled.
disabled -- the stpxInconsistencyUpdate, stpxRootInconsistencyUpdate and stpxLoopInconsistencyUpdate traps are all disabled.
enabledForInconOnly -- only the stpxInconsistencyUpdate trap is enabled. This value is read-only.
enabledForRootOnly -- only the stpxRootInconsistencyUpdate trap is enabled. This value is read-only.
enabledForLoopOnly -- only the stpxLoopInconsistencyUpdate trap is enabled. This value is read-only.
enabledForInconRootOnly -- only the stpxInconsistencyUpdate and stpxRootInconsistencyUpdate traps are enabled. This value is read-only.
enabledForInconLoopOnly -- only the stpxInconsistencyUpdate and stpxLoopInconsistencyUpdate traps are enabled. This value is read-only.
enabledForRootLoopOnly -- only the stpxRootInconsistencyUpdate and stpxLoopInconsistencyUpdate traps are enabled. This value is read-only.
This object is deprecated and replaced by stpxNotificationEnable in CISCO-STP-EXTENSIONS-MIB.
What is sysEnableStpxTrap?
This read-write flag controls whether the device generates Spanning Tree extension notifications (stpxInconsistencyUpdate, stpxRootInconsistencyUpdate, and stpxLoopInconsistencyUpdate) from CISCO-STP-EXTENSIONS-MIB.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.5.1.1.40 snmpwalk -v2c -c public <target> CISCO-STACK-MIB::sysEnableStpxTrap
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.5.1.1.40.1 snmpget -v2c -c public <target> CISCO-STACK-MIB::sysEnableStpxTrap.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.5.1.1.40.1 i <value>
Start monitoring Cisco Catalyst switch (legacy/mid-generation) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-STACK-MIB::sysEnableStpxTrap OID value, configure state conditions and alerts, and monitor any Cisco Catalyst switch (legacy/mid-generation) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.5 | workgroup | CISCO-ES-STACK-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.5.1 | ciscoStackMIB | CISCO-STACK-MIB |
| 1.3.6.1.4.1.9.5.1.1 | systemGrp | CISCO-STACK-MIB |
| 1.3.6.1.4.1.9.5.1.1.40 | sysEnableStpxTrap | CISCO-STACK-MIB |