CISCO-STACK-MIB :: portLinkFaultStatus

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-STACK-MIBportLinkFaultStatus

portLinkFaultStatus

Module: CISCO-STACK-MIB

OID (symbolic): CISCO-STACK-MIB::portLinkFaultStatus

OID (numeric): 1.3.6.1.4.1.9.5.1.4.1.1.22

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Specifies additional link fault status on a gigabit link.

noFault: Link is up and operational. nearEndFault: The port is enabled but there is no GBIC present or the local port cannot synchronize with the remote end. nearEndConfigFail: The local port has detected a configuration mismatch with the remote end. farEndDisable: The far end is in the disabled state. farEndFault: The remote port is cannot synchronize. farEndConfigFail: The remote port has detected a configuration mismatch with the local end. notApplicable: Link fault status is not applicable on this port.

What is portLinkFaultStatus?

Reports additional gigabit-link fault detail beyond basic up/down status, such as whether the link is fully operational, has no fault, or the near end has a GBIC/optics-related fault.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.5.1.4.1.1.22
snmpwalk -v2c -c public <target> CISCO-STACK-MIB::portLinkFaultStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.5.1.4.1.1.22.1
snmpget -v2c -c public <target> CISCO-STACK-MIB::portLinkFaultStatus.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> portLinkFaultStatus.1

Start monitoring Cisco Catalyst switch (legacy/mid-generation) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-STACK-MIB::portLinkFaultStatus OID value, configure state conditions and alerts, and monitor any Cisco Catalyst switch (legacy/mid-generation) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.5workgroupCISCO-ES-STACK-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.5.1ciscoStackMIBCISCO-STACK-MIB
1.3.6.1.4.1.9.5.1.4portGrpCISCO-STACK-MIB
1.3.6.1.4.1.9.5.1.4.1portTableCISCO-STACK-MIB
1.3.6.1.4.1.9.5.1.4.1.1portEntryCISCO-STACK-MIB
1.3.6.1.4.1.9.5.1.4.1.1.22portLinkFaultStatusCISCO-STACK-MIB