All MIBs › CISCO-STACK-MIB › ntpAuthenticationEnable
ntpAuthenticationEnable
Module: CISCO-STACK-MIB
OID (symbolic): CISCO-STACK-MIB::ntpAuthenticationEnable
OID (numeric): 1.3.6.1.4.1.9.5.1.15.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Specifies if authentication feature is enabled or disabled in the system.
What is ntpAuthenticationEnable?
Indicates whether NTP authentication is enabled on the device, controlling whether NTP packets must be validated using authentication keys.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.5.1.15.10 snmpwalk -v2c -c public <target> CISCO-STACK-MIB::ntpAuthenticationEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.5.1.15.10.1 snmpget -v2c -c public <target> CISCO-STACK-MIB::ntpAuthenticationEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.5.1.15.10.1 i <value>
Start monitoring Cisco Catalyst switch (legacy/mid-generation) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-STACK-MIB::ntpAuthenticationEnable OID value, configure state conditions and alerts, and monitor any Cisco Catalyst switch (legacy/mid-generation) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.5 | workgroup | CISCO-ES-STACK-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.5.1 | ciscoStackMIB | CISCO-STACK-MIB |
| 1.3.6.1.4.1.9.5.1.15 | ntpGrp | CISCO-STACK-MIB |
| 1.3.6.1.4.1.9.5.1.15.10 | ntpAuthenticationEnable | CISCO-STACK-MIB |