All MIBs › CISCO-STACK-MIB › filterPortBroadcastThrottle
filterPortBroadcastThrottle
Module: CISCO-STACK-MIB
OID (symbolic): CISCO-STACK-MIB::filterPortBroadcastThrottle
OID (numeric): 1.3.6.1.4.1.9.5.1.7.5.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The maximum number of broadcast packets per second allowed on this port. If the number of incoming broadcast packets in a one second interval exceeds this amount, packets are dropped for the rest of the interval. If the capability exists, only broadcast packets should be dropped. Otherwise, all packets are dropped during the suppression interval.
A value of 0 indicates broadcast packets should not be limited.
The ability to suppress broadcast packets in this manner exists only on certain ports. If it does not exist on this port, attempts to write a value other than 0 are rejected.
This object also applies to multicast (and/or) unicast suppression when filterPortSuppressionOption is enabled.
What is filterPortBroadcastThrottle?
Configures the maximum number of broadcast packets per second allowed on a port; excess broadcast packets are dropped for the rest of that second.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.5.1.7.5.1.4 snmpwalk -v2c -c public <target> CISCO-STACK-MIB::filterPortBroadcastThrottle
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.5.1.7.5.1.4.1 snmpget -v2c -c public <target> CISCO-STACK-MIB::filterPortBroadcastThrottle.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.5.1.7.5.1.4.1 i <value>
Start monitoring Cisco Catalyst switch (legacy/mid-generation) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-STACK-MIB::filterPortBroadcastThrottle OID value, configure state conditions and alerts, and monitor any Cisco Catalyst switch (legacy/mid-generation) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.5 | workgroup | CISCO-ES-STACK-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.5.1 | ciscoStackMIB | CISCO-STACK-MIB |
| 1.3.6.1.4.1.9.5.1.7 | filterGrp | CISCO-STACK-MIB |
| 1.3.6.1.4.1.9.5.1.7.5 | filterPortTable | CISCO-STACK-MIB |
| 1.3.6.1.4.1.9.5.1.7.5.1 | filterPortEntry | CISCO-STACK-MIB |
| 1.3.6.1.4.1.9.5.1.7.5.1.4 | filterPortBroadcastThrottle | CISCO-STACK-MIB |