CISCO-SCSI-MIB :: ciscoScsiTrnsptPointer

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-SCSI-MIBciscoScsiTrnsptPointer

ciscoScsiTrnsptPointer

Module: CISCO-SCSI-MIB

OID (symbolic): CISCO-SCSI-MIB::ciscoScsiTrnsptPointer

OID (numeric): 1.3.6.1.4.1.9.10.95.1.2.5.1.3

Node type: OBJECT-TYPE

Type: RowPointer

Access: read-only

Description: A pointer to a conceptual row in a 'transport' MIB allowing a manager to get useful information for the transport described by this entry. For example, if the transport of this device is iSCSI, this object will point to the iSCSI Instance of the iSCSI MIB. If there is no MIB for this transport, this object has the value 0.0.

What is ciscoScsiTrnsptPointer?

This object points from this generic transport entry to the corresponding row in whatever protocol-specific MIB actually describes it in detail - for example, per the desc, pointing to the iSCSI Instance row in the iSCSI MIB when the transport is iSCSI - or holds the value 0.0 if no such detailed MIB exists for that transport type. An admin wanting deeper protocol-specific detail (like iSCSI session parameters) beyond what this generic SCSI MIB provides follows this pointer to reach that richer information. A transport entry for an FC port might legitimately show 0.0 if there is no separate detailed FC-transport MIB the pointer can reference, while an iSCSI entry would resolve to a real row elsewhere.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.95.1.2.5.1.3
snmpwalk -v2c -c public <target> CISCO-SCSI-MIB::ciscoScsiTrnsptPointer

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.95.1.2.5.1.3.1
snmpget -v2c -c public <target> CISCO-SCSI-MIB::ciscoScsiTrnsptPointer.1

Start monitoring Cisco MDS Fibre Channel SAN switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-SCSI-MIB::ciscoScsiTrnsptPointer OID value, configure state conditions and alerts, and monitor any Cisco MDS Fibre Channel SAN switches from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.10ciscoExperimentCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.10.95ciscoScsiMIBCISCO-SCSI-MIB
1.3.6.1.4.1.9.10.95.1ciscoScsiObjectsCISCO-SCSI-MIB
1.3.6.1.4.1.9.10.95.1.2ciscoScsiGeneralCISCO-SCSI-MIB
1.3.6.1.4.1.9.10.95.1.2.5ciscoScsiTrnsptTableCISCO-SCSI-MIB
1.3.6.1.4.1.9.10.95.1.2.5.1ciscoScsiTrnsptEntryCISCO-SCSI-MIB
1.3.6.1.4.1.9.10.95.1.2.5.1.3ciscoScsiTrnsptPointerCISCO-SCSI-MIB