All MIBs › CISCO-RF-MIB › cRFCfgRedundancyMode
cRFCfgRedundancyMode
Module: CISCO-RF-MIB
OID (symbolic): CISCO-RF-MIB::cRFCfgRedundancyMode
OID (numeric): 1.3.6.1.4.1.9.9.176.1.2.14
Node type: OBJECT-TYPE
Type: RFMode
Access: read-write
Description: Indicates the redundancy mode configured on the device.
What is cRFCfgRedundancyMode?
Reports/configures the redundancy mode (e.g., active/standby scheme) that has been set on the device for its redundant supervisor or unit configuration.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.176.1.2.14 snmpwalk -v2c -c public <target> CISCO-RF-MIB::cRFCfgRedundancyMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.176.1.2.14.1 snmpget -v2c -c public <target> CISCO-RF-MIB::cRFCfgRedundancyMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.176.1.2.14.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cRFCfgRedundancyMode.1
Start monitoring Cisco routers/switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-RF-MIB::cRFCfgRedundancyMode OID value, configure state conditions and alerts, and monitor any Cisco routers/switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.176 | ciscoRFMIB | CISCO-RF-MIB |
| 1.3.6.1.4.1.9.9.176.1 | ciscoRFMIBObjects | CISCO-RF-MIB |
| 1.3.6.1.4.1.9.9.176.1.2 | cRFCfg | CISCO-RF-MIB |
| 1.3.6.1.4.1.9.9.176.1.2.14 | cRFCfgRedundancyMode | CISCO-RF-MIB |