All MIBs › CISCO-REPEATER-MIB › ciscoRptrPortSrcAddrCtrl
ciscoRptrPortSrcAddrCtrl
Module: CISCO-REPEATER-MIB
OID (symbolic): CISCO-REPEATER-MIB::ciscoRptrPortSrcAddrCtrl
OID (numeric): 1.3.6.1.4.1.9.9.22.1.1.1.6
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: Specifies whether or not the Source Address Control feature is enabled for the port. This feature provides the ability to control which device's specific MAC address is allowed access to the network. If the management entity specified an address via ciscoRptrPortAllowedSrcAddr, only the device with the configured MAC address is allowed access to the network. If the management entity does not specified an address, the allowed source address is learned from the last source address if valid; otherwise, the allowed source address is learned from the MAC address of the first valid packet detected on the port. When another MAC address other than the allowed source address is detected on the port, the port is partitioned.
WARNING: Configuring Source Address Control feature on the port which is used for management can cause the management entity to lose access to the agent if the management's source address does not match the allowed source address.
What is ciscoRptrPortSrcAddrCtrl?
Read-write setting that enables Source Address Control on a port, restricting network access to only a specific configured or learned MAC address.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.22.1.1.1.6 snmpwalk -v2c -c public <target> CISCO-REPEATER-MIB::ciscoRptrPortSrcAddrCtrl
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.22.1.1.1.6.1 snmpget -v2c -c public <target> CISCO-REPEATER-MIB::ciscoRptrPortSrcAddrCtrl.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.22.1.1.1.6.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> ciscoRptrPortSrcAddrCtrl.1
Start monitoring Cisco Ethernet hubs/repeaters (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-REPEATER-MIB::ciscoRptrPortSrcAddrCtrl OID value, configure state conditions and alerts, and monitor any Cisco Ethernet hubs/repeaters (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.22 | ciscoRptrMIB | CISCO-REPEATER-MIB |
| 1.3.6.1.4.1.9.9.22.1 | ciscoRptrMIBObjects | CISCO-REPEATER-MIB |
| 1.3.6.1.4.1.9.9.22.1.1 | ciscoRptrPortTable | CISCO-REPEATER-MIB |
| 1.3.6.1.4.1.9.9.22.1.1.1 | ciscoRptrPortEntry | CISCO-REPEATER-MIB |
| 1.3.6.1.4.1.9.9.22.1.1.1.6 | ciscoRptrPortSrcAddrCtrl | CISCO-REPEATER-MIB |