All MIBs › CISCO-REPEATER-MIB › ciscoRptrPortLinkTestEnabled
ciscoRptrPortLinkTestEnabled
Module: CISCO-REPEATER-MIB
OID (symbolic): CISCO-REPEATER-MIB::ciscoRptrPortLinkTestEnabled
OID (numeric): 1.3.6.1.4.1.9.9.22.1.1.1.2
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: Specifies whether or not Link Integrity Test Function is enabled for the port as specified by the 10BaseT Standard. When the link test function is enabled, the absence of the Link Test pulses and receive data on the port will cause the port to go into a Link Fail state. In this state, the data transmission, data reception and collision detection functions are disabled until valid data or 4 consecutive Link Test pulses appear on RXD+/- pair of the port.
With the Link Integrity Test Function disabled, the data driver, receiver and collision detection remain enabled irrespective of the presence or absence of data or Link Test pulses on the port.
What is ciscoRptrPortLinkTestEnabled?
Read-write setting that turns on the 10BaseT Link Integrity Test on a port, so the absence of link pulses or receive data will be detected as a link failure.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.22.1.1.1.2 snmpwalk -v2c -c public <target> CISCO-REPEATER-MIB::ciscoRptrPortLinkTestEnabled
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.22.1.1.1.2.1 snmpget -v2c -c public <target> CISCO-REPEATER-MIB::ciscoRptrPortLinkTestEnabled.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.22.1.1.1.2.1 s <value>
Start monitoring Cisco Ethernet hubs/repeaters (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-REPEATER-MIB::ciscoRptrPortLinkTestEnabled OID value, configure state conditions and alerts, and monitor any Cisco Ethernet hubs/repeaters (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.22 | ciscoRptrMIB | CISCO-REPEATER-MIB |
| 1.3.6.1.4.1.9.9.22.1 | ciscoRptrMIBObjects | CISCO-REPEATER-MIB |
| 1.3.6.1.4.1.9.9.22.1.1 | ciscoRptrPortTable | CISCO-REPEATER-MIB |
| 1.3.6.1.4.1.9.9.22.1.1.1 | ciscoRptrPortEntry | CISCO-REPEATER-MIB |
| 1.3.6.1.4.1.9.9.22.1.1.1.2 | ciscoRptrPortLinkTestEnabled | CISCO-REPEATER-MIB |