All MIBs › CISCO-REPEATER-MIB › ciscoRptrPortAutoPolarityEnabled
ciscoRptrPortAutoPolarityEnabled
Module: CISCO-REPEATER-MIB
OID (symbolic): CISCO-REPEATER-MIB::ciscoRptrPortAutoPolarityEnabled
OID (numeric): 1.3.6.1.4.1.9.9.22.1.1.1.4
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: Specifies whether or not the Automatic Receiver Polarity Reversal is enabled for the port. This feature provides the ability to invert the polarity of the signals appearing at the RXD+/- pair of the port prior to re-transmission if the polarity of the received signal is reversed (such as in the case of wiring error).
What is ciscoRptrPortAutoPolarityEnabled?
Read-write setting enabling automatic detection and correction of reversed receive-signal polarity on the port's wiring pair.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.22.1.1.1.4 snmpwalk -v2c -c public <target> CISCO-REPEATER-MIB::ciscoRptrPortAutoPolarityEnabled
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.22.1.1.1.4.1 snmpget -v2c -c public <target> CISCO-REPEATER-MIB::ciscoRptrPortAutoPolarityEnabled.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.22.1.1.1.4.1 s <value>
Start monitoring Cisco Ethernet hubs/repeaters (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-REPEATER-MIB::ciscoRptrPortAutoPolarityEnabled OID value, configure state conditions and alerts, and monitor any Cisco Ethernet hubs/repeaters (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.22 | ciscoRptrMIB | CISCO-REPEATER-MIB |
| 1.3.6.1.4.1.9.9.22.1 | ciscoRptrMIBObjects | CISCO-REPEATER-MIB |
| 1.3.6.1.4.1.9.9.22.1.1 | ciscoRptrPortTable | CISCO-REPEATER-MIB |
| 1.3.6.1.4.1.9.9.22.1.1.1 | ciscoRptrPortEntry | CISCO-REPEATER-MIB |
| 1.3.6.1.4.1.9.9.22.1.1.1.4 | ciscoRptrPortAutoPolarityEnabled | CISCO-REPEATER-MIB |