CISCO-QUEUE-MIB :: cQIfQType

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-QUEUE-MIB › cQIfQType

cQIfQType

Module: CISCO-QUEUE-MIB

OID (symbolic): CISCO-QUEUE-MIB::cQIfQType

OID (numeric): 1.3.6.1.4.1.9.9.37.1.1.1.1

Node type: OBJECT-TYPE

Type: CQAlgorithm

Access: read-only

Description: The type of queuing used in the Hold Queue.

First In First Out Queuing implies that the interface always transmits messages in the order that they are received.

Priority Queuing sorts messages out by the use of access lists. Messages in a higher priority queue are always sent in preference to messages in a lower priority queue.

Custom Queuing sorts messages out by the use of access lists. Sub-queues are selected in round robin order as either the sub-queue is drained or a given number of octets is moved from the sub-queue to the transmission queue.

Weighted Fair Queuing sorts messages by 'conversation', which is source-destination pair of addresses and sockets or ports, as defined by the network layer protocol. Messages are removed from queues in a sequence that gives each conversation a proportion of the available bandwidth.

What is cQIfQType?

Reports the queuing discipline used by the interface's hold queue, such as FIFO (transmits in received order) or priority queuing (uses access lists to prioritize higher-priority traffic).

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.37.1.1.1.1
snmpwalk -v2c -c public <target> CISCO-QUEUE-MIB::cQIfQType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.37.1.1.1.1.1
snmpget -v2c -c public <target> CISCO-QUEUE-MIB::cQIfQType.1

Start monitoring Cisco routers/switches (interface queuing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-QUEUE-MIB::cQIfQType OID value, configure state conditions and alerts, and monitor any Cisco routers/switches (interface queuing) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.37ciscoQueueMIBCISCO-QUEUE-MIB
1.3.6.1.4.1.9.9.37.1ciscoQueueObjectsCISCO-QUEUE-MIB
1.3.6.1.4.1.9.9.37.1.1cQIfTableCISCO-QUEUE-MIB
1.3.6.1.4.1.9.9.37.1.1.1cQIfEntryCISCO-QUEUE-MIB
1.3.6.1.4.1.9.9.37.1.1.1.1cQIfQTypeCISCO-QUEUE-MIB