All MIBs › CISCO-QLLC01-MIB › qllcLSAdminX25Add
qllcLSAdminX25Add
Module: CISCO-QLLC01-MIB
OID (symbolic): CISCO-QLLC01-MIB::qllcLSAdminX25Add
OID (numeric): 1.3.6.1.4.1.9.10.6.1.1.1.5
Node type: OBJECT-TYPE
Type: X121Address
Access: read-write
Description: The X.25 address associated with the qllc connection.
What is qllcLSAdminX25Add?
This read-write object configures the X.25 address associated with the QLLC connection, used to identify the remote endpoint over the X.25 network.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.6.1.1.1.5 snmpwalk -v2c -c public <target> CISCO-QLLC01-MIB::qllcLSAdminX25Add
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.6.1.1.1.5.1 snmpget -v2c -c public <target> CISCO-QLLC01-MIB::qllcLSAdminX25Add.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.6.1.1.1.5.1 s <value>
Start monitoring Cisco WAN routers (legacy SNA/X.25 gateways) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-QLLC01-MIB::qllcLSAdminX25Add OID value, configure state conditions and alerts, and monitor any Cisco WAN routers (legacy SNA/X.25 gateways) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.6 | snaqllc01 | CISCO-QLLC01-MIB |
| 1.3.6.1.4.1.9.10.6.1 | qllc | CISCO-QLLC01-MIB |
| 1.3.6.1.4.1.9.10.6.1.1 | qllcLSAdminTable | CISCO-QLLC01-MIB |
| 1.3.6.1.4.1.9.10.6.1.1.1 | qllcLSAdminEntry | CISCO-QLLC01-MIB |
| 1.3.6.1.4.1.9.10.6.1.1.1.5 | qllcLSAdminX25Add | CISCO-QLLC01-MIB |