All MIBs › CISCO-PTOPO-EXTN-MIB › cPtopoExtCdpDiscoveryState
cPtopoExtCdpDiscoveryState
Module: CISCO-PTOPO-EXTN-MIB
OID (symbolic): CISCO-PTOPO-EXTN-MIB::cPtopoExtCdpDiscoveryState
OID (numeric): 1.3.6.1.4.1.9.9.261.1.2.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This object indicates the state of physical topology discovery via CDP for the local port for which this row exists.
The agent sets this object to 'cdpDisabled' if cPtopoExtCdpProxyIf is set to zero and CDP has not been configured to run on the local port, or if CDP has not been configured to run on the proxy interface whose ifIndex is given by the non-zero value in cPtopoExtCdpProxyIf.
The enumeration 'interfaceDown' indicates that this interface is down, when cPtopoExtCdpProxyIf is set to zero, or the proxy interface is down, when cPtopoExtCdpProxyIf is set to a non-zero value.
After this row has been activated, if CDP is running (on this or the proxy interface) and no neighbors have been discovered yet, the agent sets this object to 'waiting'.
The 'discovered' state indicates that one or more neighbors have been discovered through CDP and the agent has accordingly created ptopoConnEntry(s) in the PTOPO-MIB.
What is cPtopoExtCdpDiscoveryState?
This read-only object reports the state of CDP-based physical topology discovery on a local port, such as whether CDP is disabled, enabled, or otherwise configured for that interface.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.261.1.2.1.3 snmpwalk -v2c -c public <target> CISCO-PTOPO-EXTN-MIB::cPtopoExtCdpDiscoveryState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.261.1.2.1.3.1 snmpget -v2c -c public <target> CISCO-PTOPO-EXTN-MIB::cPtopoExtCdpDiscoveryState.1
Start monitoring Cisco switches / routers (physical topology discovery) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-PTOPO-EXTN-MIB::cPtopoExtCdpDiscoveryState OID value, configure state conditions and alerts, and monitor any Cisco switches / routers (physical topology discovery) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.261 | ciscoPtopoExtnMIB | CISCO-PTOPO-EXTN-MIB |
| 1.3.6.1.4.1.9.9.261.1 | ciscoPtopoExtnMIBObjects | CISCO-PTOPO-EXTN-MIB |
| 1.3.6.1.4.1.9.9.261.1.2 | cPtopoExtCdpTable | CISCO-PTOPO-EXTN-MIB |
| 1.3.6.1.4.1.9.9.261.1.2.1 | cPtopoExtCdpEntry | CISCO-PTOPO-EXTN-MIB |
| 1.3.6.1.4.1.9.9.261.1.2.1.3 | cPtopoExtCdpDiscoveryState | CISCO-PTOPO-EXTN-MIB |