CISCO-PORT-SECURITY-MIB :: cpsIfShutdownTimeout

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-PORT-SECURITY-MIB › cpsIfShutdownTimeout

cpsIfShutdownTimeout

Module: CISCO-PORT-SECURITY-MIB

OID (symbolic): CISCO-PORT-SECURITY-MIB::cpsIfShutdownTimeout

OID (numeric): 1.3.6.1.4.1.9.9.315.1.2.1.1.13

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: The interval in which the cpsIfPortSecurityStatus may remain in shutdown(3). After the expiration of the time, all the security configuration of this port is re-installed and the port is enabled. If the value of this object is 0, the port is shut down permanently.

What is cpsIfShutdownTimeout?

Sets how long an interface remains shut down due to a port security violation before its security configuration is reinstalled and the port is re-enabled.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.315.1.2.1.1.13
snmpwalk -v2c -c public <target> CISCO-PORT-SECURITY-MIB::cpsIfShutdownTimeout

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.315.1.2.1.1.13.1
snmpget -v2c -c public <target> CISCO-PORT-SECURITY-MIB::cpsIfShutdownTimeout.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.315.1.2.1.1.13.1 i <value>

Start monitoring Cisco Catalyst switch (Layer 2 port security) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-PORT-SECURITY-MIB::cpsIfShutdownTimeout OID value, configure state conditions and alerts, and monitor any Cisco Catalyst switch (Layer 2 port security) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.315ciscoPortSecurityMIBCISCO-PORT-SECURITY-MIB
1.3.6.1.4.1.9.9.315.1ciscoPortSecurityMIBObjectsCISCO-PORT-SECURITY-MIB
1.3.6.1.4.1.9.9.315.1.2cpsInterfaceObjectsCISCO-PORT-SECURITY-MIB
1.3.6.1.4.1.9.9.315.1.2.1cpsIfConfigTableCISCO-PORT-SECURITY-MIB
1.3.6.1.4.1.9.9.315.1.2.1.1cpsIfConfigEntryCISCO-PORT-SECURITY-MIB
1.3.6.1.4.1.9.9.315.1.2.1.1.13cpsIfShutdownTimeoutCISCO-PORT-SECURITY-MIB