CISCO-PORT-SECURITY-MIB :: cpsIfInvalidSrcRateLimitEnable

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-PORT-SECURITY-MIB › cpsIfInvalidSrcRateLimitEnable

cpsIfInvalidSrcRateLimitEnable

Module: CISCO-PORT-SECURITY-MIB

OID (symbolic): CISCO-PORT-SECURITY-MIB::cpsIfInvalidSrcRateLimitEnable

OID (numeric): 1.3.6.1.4.1.9.9.315.1.2.1.1.16

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: Set to 'true' to enable and 'false' to disable rate limiting for invalid source MAC addresses received on this interface. Enabling this feature will help to rate limit packets which comes with invalid src MAC address on this interface.

What is cpsIfInvalidSrcRateLimitEnable?

This read-write setting enables or disables rate limiting of packets that arrive on an interface with invalid source MAC addresses, helping to control malicious or malformed traffic.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.315.1.2.1.1.16
snmpwalk -v2c -c public <target> CISCO-PORT-SECURITY-MIB::cpsIfInvalidSrcRateLimitEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.315.1.2.1.1.16.1
snmpget -v2c -c public <target> CISCO-PORT-SECURITY-MIB::cpsIfInvalidSrcRateLimitEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.315.1.2.1.1.16.1 s <value>

Start monitoring Cisco Catalyst switch (Layer 2 port security) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-PORT-SECURITY-MIB::cpsIfInvalidSrcRateLimitEnable OID value, configure state conditions and alerts, and monitor any Cisco Catalyst switch (Layer 2 port security) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.315ciscoPortSecurityMIBCISCO-PORT-SECURITY-MIB
1.3.6.1.4.1.9.9.315.1ciscoPortSecurityMIBObjectsCISCO-PORT-SECURITY-MIB
1.3.6.1.4.1.9.9.315.1.2cpsInterfaceObjectsCISCO-PORT-SECURITY-MIB
1.3.6.1.4.1.9.9.315.1.2.1cpsIfConfigTableCISCO-PORT-SECURITY-MIB
1.3.6.1.4.1.9.9.315.1.2.1.1cpsIfConfigEntryCISCO-PORT-SECURITY-MIB
1.3.6.1.4.1.9.9.315.1.2.1.1.16cpsIfInvalidSrcRateLimitEnableCISCO-PORT-SECURITY-MIB