All MIBs › CISCO-OSCP-MIB › coscpLinkSelPriority
coscpLinkSelPriority
Module: CISCO-OSCP-MIB
OID (symbolic): CISCO-OSCP-MIB::coscpLinkSelPriority
OID (numeric): 1.3.6.1.4.1.9.9.202.1.2.1.10
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This object indicates the priority with which this link gets selected as the active Optical Supervisory Channel (OSC) when multiple links are present in the same wavelength bundle. If selected, this link will be used to transmit all control and network management traffic to the remote switch, for the entire wavelength bundle.
The link with the highest value of the selection priority is chosen by this switch to be the active OSC. Only links in the wavelength bundle that have coscpLinkHelloState value 'twoWay' are considered. If there is more than one link with the same highest value of the selection priority, the choice between these links is arbitrary. If it is desired to have one OSC link candidate be picked over another, its priority should be configured to a higher value than other candidate links.
The OSCP will react to a reconfiguration of the selection priority according to the rules defined for the configured variable coscpPriorityChangeMode.
What is coscpLinkSelPriority?
Configures the priority used to select this link as the active Optical Supervisory Channel when multiple links exist in the same wavelength bundle; the selected link carries all control and network management traffic.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.202.1.2.1.10 snmpwalk -v2c -c public <target> CISCO-OSCP-MIB::coscpLinkSelPriority
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.202.1.2.1.10.1 snmpget -v2c -c public <target> CISCO-OSCP-MIB::coscpLinkSelPriority.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.202.1.2.1.10.1 i <value>
Start monitoring Cisco optical transport / DWDM network element with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-OSCP-MIB::coscpLinkSelPriority OID value, configure state conditions and alerts, and monitor any Cisco optical transport / DWDM network element from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.202 | ciscoOscpMIB | CISCO-OSCP-MIB |
| 1.3.6.1.4.1.9.9.202.1 | ciscoOscpMIBObjects | CISCO-OSCP-MIB |
| 1.3.6.1.4.1.9.9.202.1.2 | coscpLinkTable | CISCO-OSCP-MIB |
| 1.3.6.1.4.1.9.9.202.1.2.1 | coscpLinkEntry | CISCO-OSCP-MIB |
| 1.3.6.1.4.1.9.9.202.1.2.1.10 | coscpLinkSelPriority | CISCO-OSCP-MIB |