CISCO-OSCP-MIB :: coscpLinkConfigBundleId

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-OSCP-MIB › coscpLinkConfigBundleId

coscpLinkConfigBundleId

Module: CISCO-OSCP-MIB

OID (symbolic): CISCO-OSCP-MIB::coscpLinkConfigBundleId

OID (numeric): 1.3.6.1.4.1.9.9.202.1.2.1.8

Node type: OBJECT-TYPE

Type: CoscpBundleId

Access: read-write

Description: This object specifies the identifier of the wavelength bundle to the remote switch configured for this link. The configured bundle identifier is carried in the OSCP hello packet. At both this switch and the remote switch, the configured bundle identifier is used to derive coscpLinkDerivedBundleId according to the algorithm presented in the description of the coscpLinkDerivedBundleId.

By default all links have the value zero. Since all links have the same default value, the default behavior is to aggregate all links between two switches into a single logical link with derived bundle identifier value zero.

In order to assign a non-default bundle identifier to a link between two switches, only one side needs to be configured with the non-default value. The distinguished value zero indicates that the switch will use as the derived bundle identifier value whatever value the remote switch has.

What is coscpLinkConfigBundleId?

Configures the wavelength bundle identifier for this link that is advertised in OSCP hello packets, used by both ends to agree on how links should be aggregated.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.202.1.2.1.8
snmpwalk -v2c -c public <target> CISCO-OSCP-MIB::coscpLinkConfigBundleId

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.202.1.2.1.8.1
snmpget -v2c -c public <target> CISCO-OSCP-MIB::coscpLinkConfigBundleId.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.202.1.2.1.8.1 s <value>

Start monitoring Cisco optical transport / DWDM network element with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-OSCP-MIB::coscpLinkConfigBundleId OID value, configure state conditions and alerts, and monitor any Cisco optical transport / DWDM network element from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.202ciscoOscpMIBCISCO-OSCP-MIB
1.3.6.1.4.1.9.9.202.1ciscoOscpMIBObjectsCISCO-OSCP-MIB
1.3.6.1.4.1.9.9.202.1.2coscpLinkTableCISCO-OSCP-MIB
1.3.6.1.4.1.9.9.202.1.2.1coscpLinkEntryCISCO-OSCP-MIB
1.3.6.1.4.1.9.9.202.1.2.1.8coscpLinkConfigBundleIdCISCO-OSCP-MIB