All MIBs › CISCO-OPTICAL-MONITOR-MIB › cOpticalParamThreshSource
cOpticalParamThreshSource
Module: CISCO-OPTICAL-MONITOR-MIB
OID (symbolic): CISCO-OPTICAL-MONITOR-MIB::cOpticalParamThreshSource
OID (numeric): 1.3.6.1.4.1.9.9.264.1.1.1.1.19
Node type: OBJECT-TYPE
Type: Bits
Access: read-write
Description: This object indicates if the current value of a particular threshold in this entry is user configured value or it is a system default value. It also allows user to specify the list of thresholds for this entry which should be restored to their system default values.
The bit 'highAlarmThresh' corresponds to the object cOpticalParamHighAlarmThresh.
The bit 'highWarnThresh' corresponds to the object cOpticalParamHighWarningThresh.
The bit 'lowAlarmThresh' corresponds to the object cOpticalParamLowAlarmThresh.
The bit 'lowWarnThresh' corresponds to the object cOpticalParamLowWarningThresh.
A value of 0 for a bit indicates that corresponding object has system default value of threshold.
A value of 1 for a bit indicates that corresponding object has user configured threshold value.
A user may only change value of each of the bits to zero.
Setting a bit to 0 will reset the corresponding threshold to its default value.
System will change a bit from 0 to 1 when its corresponding threshold is changed by user from its default to any other value.
What is cOpticalParamThreshSource?
Indicates whether a threshold value for the optical parameter is user-configured or a system default, and lets an operator request that thresholds be reset to their system default values.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.264.1.1.1.1.19 snmpwalk -v2c -c public <target> CISCO-OPTICAL-MONITOR-MIB::cOpticalParamThreshSource
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.264.1.1.1.1.19.1 snmpget -v2c -c public <target> CISCO-OPTICAL-MONITOR-MIB::cOpticalParamThreshSource.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.264.1.1.1.1.19.1 s <value>
Start monitoring Cisco DWDM optical transport platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-OPTICAL-MONITOR-MIB::cOpticalParamThreshSource OID value, configure state conditions and alerts, and monitor any Cisco DWDM optical transport platforms from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.264 | ciscoOpticalMonitorMIB | CISCO-OPTICAL-MONITOR-MIB |
| 1.3.6.1.4.1.9.9.264.1 | cOpticalMonitorMIBObjects | CISCO-OPTICAL-MONITOR-MIB |
| 1.3.6.1.4.1.9.9.264.1.1 | cOpticalMonGroup | CISCO-OPTICAL-MONITOR-MIB |
| 1.3.6.1.4.1.9.9.264.1.1.1 | cOpticalMonTable | CISCO-OPTICAL-MONITOR-MIB |
| 1.3.6.1.4.1.9.9.264.1.1.1.1 | cOpticalMonEntry | CISCO-OPTICAL-MONITOR-MIB |
| 1.3.6.1.4.1.9.9.264.1.1.1.1.19 | cOpticalParamThreshSource | CISCO-OPTICAL-MONITOR-MIB |