All MIBs › CISCO-OPTICAL-MONITOR-MIB › cOpticalParamLowWarningThresh
cOpticalParamLowWarningThresh
Module: CISCO-OPTICAL-MONITOR-MIB
OID (symbolic): CISCO-OPTICAL-MONITOR-MIB::cOpticalParamLowWarningThresh
OID (numeric): 1.3.6.1.4.1.9.9.264.1.1.1.1.11
Node type: OBJECT-TYPE
Type: OpticalParameterValue
Access: read-write
Description: This object is used to set a low warning threshold on the optical parameter being monitored.
A threshold crossing condition will be indicated if the value given by cOpticalParameterValue goes from above the value configured in this object to below the value configured in this object, or if the initial value of cOpticalParameterValue object is lower than the value configured in this object. For network elements that incorporate a soak time in the status indications, this threshold violation will be indicated in the cOpticalParamAlarmStatus object only after it persists for a period of time that equals the set soak interval.
This threshold crossing may or may not be alarmed or reported, based on the severity level specified by the cOpticalParamLowWarningSev object.
What is cOpticalParamLowWarningThresh?
Configures the low warning threshold for a monitored optical parameter; a threshold-crossing condition is flagged when the measured value falls below this configured limit.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.264.1.1.1.1.11 snmpwalk -v2c -c public <target> CISCO-OPTICAL-MONITOR-MIB::cOpticalParamLowWarningThresh
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.264.1.1.1.1.11.1 snmpget -v2c -c public <target> CISCO-OPTICAL-MONITOR-MIB::cOpticalParamLowWarningThresh.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.264.1.1.1.1.11.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cOpticalParamLowWarningThresh.1
Start monitoring Cisco DWDM optical transport platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-OPTICAL-MONITOR-MIB::cOpticalParamLowWarningThresh OID value, configure state conditions and alerts, and monitor any Cisco DWDM optical transport platforms from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.264 | ciscoOpticalMonitorMIB | CISCO-OPTICAL-MONITOR-MIB |
| 1.3.6.1.4.1.9.9.264.1 | cOpticalMonitorMIBObjects | CISCO-OPTICAL-MONITOR-MIB |
| 1.3.6.1.4.1.9.9.264.1.1 | cOpticalMonGroup | CISCO-OPTICAL-MONITOR-MIB |
| 1.3.6.1.4.1.9.9.264.1.1.1 | cOpticalMonTable | CISCO-OPTICAL-MONITOR-MIB |
| 1.3.6.1.4.1.9.9.264.1.1.1.1 | cOpticalMonEntry | CISCO-OPTICAL-MONITOR-MIB |
| 1.3.6.1.4.1.9.9.264.1.1.1.1.11 | cOpticalParamLowWarningThresh | CISCO-OPTICAL-MONITOR-MIB |