All MIBs › CISCO-OPTICAL-MONITOR-MIB › cOpticalParamHighWarningThresh
cOpticalParamHighWarningThresh
Module: CISCO-OPTICAL-MONITOR-MIB
OID (symbolic): CISCO-OPTICAL-MONITOR-MIB::cOpticalParamHighWarningThresh
OID (numeric): 1.3.6.1.4.1.9.9.264.1.1.1.1.7
Node type: OBJECT-TYPE
Type: OpticalParameterValue
Access: read-write
Description: This object is used to set a high warning threshold on the optical parameter being monitored.
A threshold crossing condition will be indicated if the value given by cOpticalParameterValue goes from below the value configured in this object to above the value configured in this object, or if the initial value of cOpticalParameterValue exceeds the value configured in this object. For network elements that incorporate a soak time in the status indications, this threshold violation will be indicated in the cOpticalParamAlarmStatus object only after it persists for a period of time that equals the set soak interval.
This threshold crossing may or may not be alarmed or reported, based on the severity level specified by the cOpticalParamHighWarningSev object.
What is cOpticalParamHighWarningThresh?
Configures the high warning threshold for a monitored optical parameter; a threshold-crossing condition is flagged when the measured value rises above this configured limit.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.264.1.1.1.1.7 snmpwalk -v2c -c public <target> CISCO-OPTICAL-MONITOR-MIB::cOpticalParamHighWarningThresh
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.264.1.1.1.1.7.1 snmpget -v2c -c public <target> CISCO-OPTICAL-MONITOR-MIB::cOpticalParamHighWarningThresh.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.264.1.1.1.1.7.1 s <value>
Start monitoring Cisco DWDM optical transport platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-OPTICAL-MONITOR-MIB::cOpticalParamHighWarningThresh OID value, configure state conditions and alerts, and monitor any Cisco DWDM optical transport platforms from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.264 | ciscoOpticalMonitorMIB | CISCO-OPTICAL-MONITOR-MIB |
| 1.3.6.1.4.1.9.9.264.1 | cOpticalMonitorMIBObjects | CISCO-OPTICAL-MONITOR-MIB |
| 1.3.6.1.4.1.9.9.264.1.1 | cOpticalMonGroup | CISCO-OPTICAL-MONITOR-MIB |
| 1.3.6.1.4.1.9.9.264.1.1.1 | cOpticalMonTable | CISCO-OPTICAL-MONITOR-MIB |
| 1.3.6.1.4.1.9.9.264.1.1.1.1 | cOpticalMonEntry | CISCO-OPTICAL-MONITOR-MIB |
| 1.3.6.1.4.1.9.9.264.1.1.1.1.7 | cOpticalParamHighWarningThresh | CISCO-OPTICAL-MONITOR-MIB |