CISCO-OPTICAL-MONITOR-MIB :: cOpticalParamHighWarningSev

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-OPTICAL-MONITOR-MIB › cOpticalParamHighWarningSev

cOpticalParamHighWarningSev

Module: CISCO-OPTICAL-MONITOR-MIB

OID (symbolic): CISCO-OPTICAL-MONITOR-MIB::cOpticalParamHighWarningSev

OID (numeric): 1.3.6.1.4.1.9.9.264.1.1.1.1.8

Node type: OBJECT-TYPE

Type: OpticalAlarmSeverity

Access: read-write

Description: This object is used to specify a severity level associated with the high warning threshold given by the cOpticalParamHighWarningThresh object. The values 'critical', 'major', and 'cleared' do not apply.

The severity level configured in this object must be lower than the level configured in the cOpticalParamHighAlarmSev object.

If this object is set to 'notReported', no notifications will be generated when this threshold is exceeded, irrespective of the value configured in the cOpticalNotifyEnable object.

What is cOpticalParamHighWarningSev?

Sets the severity level to associate with a high-warning threshold crossing on an optical parameter, excluding the critical, major, and cleared severities.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.264.1.1.1.1.8
snmpwalk -v2c -c public <target> CISCO-OPTICAL-MONITOR-MIB::cOpticalParamHighWarningSev

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.264.1.1.1.1.8.1
snmpget -v2c -c public <target> CISCO-OPTICAL-MONITOR-MIB::cOpticalParamHighWarningSev.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.264.1.1.1.1.8.1 s <value>

Start monitoring Cisco DWDM optical transport platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-OPTICAL-MONITOR-MIB::cOpticalParamHighWarningSev OID value, configure state conditions and alerts, and monitor any Cisco DWDM optical transport platforms from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.264ciscoOpticalMonitorMIBCISCO-OPTICAL-MONITOR-MIB
1.3.6.1.4.1.9.9.264.1cOpticalMonitorMIBObjectsCISCO-OPTICAL-MONITOR-MIB
1.3.6.1.4.1.9.9.264.1.1cOpticalMonGroupCISCO-OPTICAL-MONITOR-MIB
1.3.6.1.4.1.9.9.264.1.1.1cOpticalMonTableCISCO-OPTICAL-MONITOR-MIB
1.3.6.1.4.1.9.9.264.1.1.1.1cOpticalMonEntryCISCO-OPTICAL-MONITOR-MIB
1.3.6.1.4.1.9.9.264.1.1.1.1.8cOpticalParamHighWarningSevCISCO-OPTICAL-MONITOR-MIB