All MIBs › CISCO-OPTICAL-MONITOR-MIB › cOpticalParamHighAlarmThresh
cOpticalParamHighAlarmThresh
Module: CISCO-OPTICAL-MONITOR-MIB
OID (symbolic): CISCO-OPTICAL-MONITOR-MIB::cOpticalParamHighAlarmThresh
OID (numeric): 1.3.6.1.4.1.9.9.264.1.1.1.1.5
Node type: OBJECT-TYPE
Type: OpticalParameterValue
Access: read-write
Description: This object is used to set a high alarm threshold on the optical parameter being monitored.
An alarm condition will be raised if the value given by cOpticalParameterValue goes from below the value configured in this object to above the value configured in this object, or if the initial value of cOpticalParameterValue exceeds the value configured in this object. For network elements that incorporate a soak time in the status indications, this alarm will be indicated in the cOpticalParamAlarmStatus object only after it persists for a period of time that equals the set soak interval.
The severity level of the alarm is specified by the cOpticalParamHighAlarmSev object.
When the cOpticalMonParameterType object is set to 'power' for the receive direction at a transceiver, this object specifies the receiver saturation level.
What is cOpticalParamHighAlarmThresh?
Configures the high alarm threshold for a monitored optical parameter; an alarm is raised when the measured value rises above this configured limit.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.264.1.1.1.1.5 snmpwalk -v2c -c public <target> CISCO-OPTICAL-MONITOR-MIB::cOpticalParamHighAlarmThresh
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.264.1.1.1.1.5.1 snmpget -v2c -c public <target> CISCO-OPTICAL-MONITOR-MIB::cOpticalParamHighAlarmThresh.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.264.1.1.1.1.5.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cOpticalParamHighAlarmThresh.1
Start monitoring Cisco DWDM optical transport platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-OPTICAL-MONITOR-MIB::cOpticalParamHighAlarmThresh OID value, configure state conditions and alerts, and monitor any Cisco DWDM optical transport platforms from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.264 | ciscoOpticalMonitorMIB | CISCO-OPTICAL-MONITOR-MIB |
| 1.3.6.1.4.1.9.9.264.1 | cOpticalMonitorMIBObjects | CISCO-OPTICAL-MONITOR-MIB |
| 1.3.6.1.4.1.9.9.264.1.1 | cOpticalMonGroup | CISCO-OPTICAL-MONITOR-MIB |
| 1.3.6.1.4.1.9.9.264.1.1.1 | cOpticalMonTable | CISCO-OPTICAL-MONITOR-MIB |
| 1.3.6.1.4.1.9.9.264.1.1.1.1 | cOpticalMonEntry | CISCO-OPTICAL-MONITOR-MIB |
| 1.3.6.1.4.1.9.9.264.1.1.1.1.5 | cOpticalParamHighAlarmThresh | CISCO-OPTICAL-MONITOR-MIB |