All MIBs › CISCO-NAT-CGN-EXT-MIB › cNatCgnCounterPortUsageClearLowThreshold
cNatCgnCounterPortUsageClearLowThreshold
Module: CISCO-NAT-CGN-EXT-MIB
OID (symbolic): CISCO-NAT-CGN-EXT-MIB::cNatCgnCounterPortUsageClearLowThreshold
OID (numeric): 1.3.6.1.4.1.9.9.818.1.2.1.1.14
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: This object specifies the clear low threshold in percentage of available public ports that are used up. The notification cNatCgnNotifPortUsageWatermarkLowClear is sent once the value of cNatCgnCounterAveragePortAllocation becomes more than or equal to this value. If this object is set to zero, the notification is not generated.
Implementations must ensure that values of objects cNatCgnCounterPortUsageClearLowThreshold and cNatCgnCounterPortUsageLowThreshold remain consistent. For example, an implementation must respond with an inconsistentValue error if an attempt is made to set the the value of cNatCgnCounterPortUsageClearLowThreshold to be less than or equal to that of cNatCgnCounterPortUsageLowThreshold and vice versa.
What is cNatCgnCounterPortUsageClearLowThreshold?
A configurable percentage threshold that clears the low port-usage alarm once average port allocation rises back to or above this value, triggering a watermark-low-clear notification.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.818.1.2.1.1.14 snmpwalk -v2c -c public <target> CISCO-NAT-CGN-EXT-MIB::cNatCgnCounterPortUsageClearLowThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.818.1.2.1.1.14.1 snmpget -v2c -c public <target> CISCO-NAT-CGN-EXT-MIB::cNatCgnCounterPortUsageClearLowThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.818.1.2.1.1.14.1 i <value>
Start monitoring Cisco service-provider router (Carrier-Grade NAT/CGN) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-NAT-CGN-EXT-MIB::cNatCgnCounterPortUsageClearLowThreshold OID value, configure state conditions and alerts, and monitor any Cisco service-provider router (Carrier-Grade NAT/CGN) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.818 | ciscoNatCgnExtMIB | CISCO-NAT-CGN-EXT-MIB |
| 1.3.6.1.4.1.9.9.818.1 | ciscoNatCgnExtMIBObjects | CISCO-NAT-CGN-EXT-MIB |
| 1.3.6.1.4.1.9.9.818.1.2 | cNatCgnCounters | CISCO-NAT-CGN-EXT-MIB |
| 1.3.6.1.4.1.9.9.818.1.2.1 | cNatCgnCounterTable | CISCO-NAT-CGN-EXT-MIB |
| 1.3.6.1.4.1.9.9.818.1.2.1.1 | cNatCgnCounterEntry | CISCO-NAT-CGN-EXT-MIB |
| 1.3.6.1.4.1.9.9.818.1.2.1.1.14 | cNatCgnCounterPortUsageClearLowThreshold | CISCO-NAT-CGN-EXT-MIB |