All MIBs › CISCO-NAT-CGN-EXT-MIB › cNatCgnCounterPortUsageClearHighThreshold
cNatCgnCounterPortUsageClearHighThreshold
Module: CISCO-NAT-CGN-EXT-MIB
OID (symbolic): CISCO-NAT-CGN-EXT-MIB::cNatCgnCounterPortUsageClearHighThreshold
OID (numeric): 1.3.6.1.4.1.9.9.818.1.2.1.1.16
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: This object specifies the clear high threshold in percentage of available public ports that are used up. The notification cNatCgnNotifPortUsageWatermarkHighClear is sent once the value of cNatCgnCounterAveragePortAllocation becomes less than or equal to this value. If this object is set to zero, the notification is not generated.
Implementations must ensure that values of objects cNatCgnCounterPortUsageClearHighThreshold and cNatCgnCounterPortUsageHighThreshold remain consistent. For example, an implementation must respond with an inconsistentValue error if an attempt is made to set the the value of cNatCgnCounterPortUsageClearHighThreshold to be more than or equal to that of cNatCgnCounterPortUsageHighThreshold and vice versa.
What is cNatCgnCounterPortUsageClearHighThreshold?
A configurable percentage threshold that clears the high port-usage alarm once average port allocation falls back to or below this value, triggering a watermark-high-clear notification.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.818.1.2.1.1.16 snmpwalk -v2c -c public <target> CISCO-NAT-CGN-EXT-MIB::cNatCgnCounterPortUsageClearHighThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.818.1.2.1.1.16.1 snmpget -v2c -c public <target> CISCO-NAT-CGN-EXT-MIB::cNatCgnCounterPortUsageClearHighThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.818.1.2.1.1.16.1 i <value>
Start monitoring Cisco service-provider router (Carrier-Grade NAT/CGN) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-NAT-CGN-EXT-MIB::cNatCgnCounterPortUsageClearHighThreshold OID value, configure state conditions and alerts, and monitor any Cisco service-provider router (Carrier-Grade NAT/CGN) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.818 | ciscoNatCgnExtMIB | CISCO-NAT-CGN-EXT-MIB |
| 1.3.6.1.4.1.9.9.818.1 | ciscoNatCgnExtMIBObjects | CISCO-NAT-CGN-EXT-MIB |
| 1.3.6.1.4.1.9.9.818.1.2 | cNatCgnCounters | CISCO-NAT-CGN-EXT-MIB |
| 1.3.6.1.4.1.9.9.818.1.2.1 | cNatCgnCounterTable | CISCO-NAT-CGN-EXT-MIB |
| 1.3.6.1.4.1.9.9.818.1.2.1.1 | cNatCgnCounterEntry | CISCO-NAT-CGN-EXT-MIB |
| 1.3.6.1.4.1.9.9.818.1.2.1.1.16 | cNatCgnCounterPortUsageClearHighThreshold | CISCO-NAT-CGN-EXT-MIB |