All MIBs › CISCO-METRO-PHY-MIB › cmPhyTxEncapFarEndPktErrors
cmPhyTxEncapFarEndPktErrors
Module: CISCO-METRO-PHY-MIB
OID (symbolic): CISCO-METRO-PHY-MIB::cmPhyTxEncapFarEndPktErrors
OID (numeric): 1.3.6.1.4.1.9.10.69.1.2.1.1.11
Node type: OBJECT-TYPE
Type: Counter32
Access: read-only
Description: This object represents the lower word value of the counter associated with ingress error indications from the far end of an Ethernet network, where an ESCON stream is encapsulated in Ethernet packets. This counter is incremented whenever an ESCON packet or control character has 8b/10b code violations or running disparity errors in the ingress direction at the far end of the Ethernet network.
This object has a valid value only for ESCON interfaces where Ethernet encapsulation is performed.
NOTE: The object cmPhyTxEncapFarEndPktErrOverflow contains the higher 32 bits of this counter value. SNMP v2c or v3 managers can use the cmPhyHCTxEsconPktInd object directly which is a 64 bit counter.
What is cmPhyTxEncapFarEndPktErrors?
Read-only counter (lower 32 bits) tracking error indications reported by the far end of an Ethernet link carrying encapsulated ESCON traffic, incremented on ESCON packet or control-character errors.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.69.1.2.1.1.11 snmpwalk -v2c -c public <target> CISCO-METRO-PHY-MIB::cmPhyTxEncapFarEndPktErrors
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.69.1.2.1.1.11.1 snmpget -v2c -c public <target> CISCO-METRO-PHY-MIB::cmPhyTxEncapFarEndPktErrors.1
Start monitoring Cisco Metro Ethernet / DWDM optical switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-METRO-PHY-MIB::cmPhyTxEncapFarEndPktErrors OID value, configure state conditions and alerts, and monitor any Cisco Metro Ethernet / DWDM optical switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.69 | ciscoMetroPhyMIB | CISCO-METRO-PHY-MIB |
| 1.3.6.1.4.1.9.10.69.1 | ciscoMetroPhyMIBObjects | CISCO-METRO-PHY-MIB |
| 1.3.6.1.4.1.9.10.69.1.2 | cmPhyStatistics | CISCO-METRO-PHY-MIB |
| 1.3.6.1.4.1.9.10.69.1.2.1 | cmPhyStatisticsTable | CISCO-METRO-PHY-MIB |
| 1.3.6.1.4.1.9.10.69.1.2.1.1 | cmPhyStatisticsEntry | CISCO-METRO-PHY-MIB |
| 1.3.6.1.4.1.9.10.69.1.2.1.1.11 | cmPhyTxEncapFarEndPktErrors | CISCO-METRO-PHY-MIB |