All MIBs › CISCO-METRO-PHY-MIB › cmPhyTxEncapFarEndPktErrOverflow
cmPhyTxEncapFarEndPktErrOverflow
Module: CISCO-METRO-PHY-MIB
OID (symbolic): CISCO-METRO-PHY-MIB::cmPhyTxEncapFarEndPktErrOverflow
OID (numeric): 1.3.6.1.4.1.9.10.69.1.2.1.1.12
Node type: OBJECT-TYPE
Type: Counter32
Access: read-only
Description: This object represents the higher word value of the counter associated with ingress error indications from the far end of an Ethernet network, where an ESCON stream is encapsulated in Ethernet packets. This counter is incremented whenever an ESCON packet or control character has 8b/10b code violations or running disparity errors in the ingress direction at the far end of the Ethernet network.
This object has a valid value only for ESCON interfaces where Ethernet encapsulation is performed.
NOTE: The object cmPhyTxEncapFarEndPktErrors contains the lower 32 bits of this counter value. SNMP v2c or v3 managers can use the cmPhyHCTxEsconPktInd object directly which is a 64 bit counter.
What is cmPhyTxEncapFarEndPktErrOverflow?
Read-only counter holding the high-order 32 bits of far-end ESCON-over-Ethernet packet error indications, extending cmPhyTxEncapFarEndPktErrors beyond 32 bits.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.69.1.2.1.1.12 snmpwalk -v2c -c public <target> CISCO-METRO-PHY-MIB::cmPhyTxEncapFarEndPktErrOverflow
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.69.1.2.1.1.12.1 snmpget -v2c -c public <target> CISCO-METRO-PHY-MIB::cmPhyTxEncapFarEndPktErrOverflow.1
Start monitoring Cisco Metro Ethernet / DWDM optical switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-METRO-PHY-MIB::cmPhyTxEncapFarEndPktErrOverflow OID value, configure state conditions and alerts, and monitor any Cisco Metro Ethernet / DWDM optical switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.69 | ciscoMetroPhyMIB | CISCO-METRO-PHY-MIB |
| 1.3.6.1.4.1.9.10.69.1 | ciscoMetroPhyMIBObjects | CISCO-METRO-PHY-MIB |
| 1.3.6.1.4.1.9.10.69.1.2 | cmPhyStatistics | CISCO-METRO-PHY-MIB |
| 1.3.6.1.4.1.9.10.69.1.2.1 | cmPhyStatisticsTable | CISCO-METRO-PHY-MIB |
| 1.3.6.1.4.1.9.10.69.1.2.1.1 | cmPhyStatisticsEntry | CISCO-METRO-PHY-MIB |
| 1.3.6.1.4.1.9.10.69.1.2.1.1.12 | cmPhyTxEncapFarEndPktErrOverflow | CISCO-METRO-PHY-MIB |