All MIBs › CISCO-METRO-PHY-MIB › cmPhyIfProtocol
cmPhyIfProtocol
Module: CISCO-METRO-PHY-MIB
OID (symbolic): CISCO-METRO-PHY-MIB::cmPhyIfProtocol
OID (numeric): 1.3.6.1.4.1.9.10.69.1.1.1.1.2
Node type: OBJECT-TYPE
Type: ProtocolType
Access: read-write
Description: This object is used to specify the protocol of the data carried over the client side interface.
This object applies to linecards which support a variety of protocols and allow dynamic configuration of the specific protocol to be monitored on the interface. The ifType value for such interfaces remains fixed. The agent may use this object to identify the protocol to be monitored (see the cmPhyIfMonitor object), to set the clock rate for the interface (see the cmPhyIfClockRate object), or to enable or disable functionality related to the protocol, for example OFC (see the cmPhyIfOFC object).
The value of this object cannot be modified when the cmPhyIfMonitor object is set to 'true' for that interface. Also, this object does not apply to the trunk side interfaces.
What is cmPhyIfProtocol?
Configures which protocol is carried and monitored on the client-side interface, for linecards that support dynamic selection among multiple protocols.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.69.1.1.1.1.2 snmpwalk -v2c -c public <target> CISCO-METRO-PHY-MIB::cmPhyIfProtocol
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.69.1.1.1.1.2.1 snmpget -v2c -c public <target> CISCO-METRO-PHY-MIB::cmPhyIfProtocol.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.69.1.1.1.1.2.1 s <value>
Start monitoring Cisco Metro Ethernet / DWDM optical switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-METRO-PHY-MIB::cmPhyIfProtocol OID value, configure state conditions and alerts, and monitor any Cisco Metro Ethernet / DWDM optical switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.69 | ciscoMetroPhyMIB | CISCO-METRO-PHY-MIB |
| 1.3.6.1.4.1.9.10.69.1 | ciscoMetroPhyMIBObjects | CISCO-METRO-PHY-MIB |
| 1.3.6.1.4.1.9.10.69.1.1 | cmPhyIf | CISCO-METRO-PHY-MIB |
| 1.3.6.1.4.1.9.10.69.1.1.1 | cmPhyIfTable | CISCO-METRO-PHY-MIB |
| 1.3.6.1.4.1.9.10.69.1.1.1.1 | cmPhyIfEntry | CISCO-METRO-PHY-MIB |
| 1.3.6.1.4.1.9.10.69.1.1.1.1.2 | cmPhyIfProtocol | CISCO-METRO-PHY-MIB |