All MIBs › CISCO-METRO-PHY-MIB › cmPhyIfOFC
cmPhyIfOFC
Module: CISCO-METRO-PHY-MIB
OID (symbolic): CISCO-METRO-PHY-MIB::cmPhyIfOFC
OID (numeric): 1.3.6.1.4.1.9.10.69.1.1.1.1.6
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: This object allows the management client to enable OFC(Open Fibre Control) safety protocol for the client side interfaces, by writing a 'true' value to this object. A 'false' value would disable OFC.
The default value of this object varies depending on the value of cmPhyIfProtocol and cmPhyIfClockRate. When cmPhyIfProtocol or cmPhyIfClockRate is reset, then the value of this object is automatically reset to the default value for that protocol or rate. If non-default OFC behavior is desired, then this object should be set after cmPhyIfProtocol or cmPhyIfClockRate has been reset.
This object is not applicable to trunk side interfaces.
What is cmPhyIfOFC?
A read-write setting that enables or disables the Open Fibre Control (OFC) laser safety protocol on client-side optical interfaces.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.69.1.1.1.1.6 snmpwalk -v2c -c public <target> CISCO-METRO-PHY-MIB::cmPhyIfOFC
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.69.1.1.1.1.6.1 snmpget -v2c -c public <target> CISCO-METRO-PHY-MIB::cmPhyIfOFC.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.69.1.1.1.1.6.1 s <value>
Start monitoring Cisco Metro Ethernet / DWDM optical switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-METRO-PHY-MIB::cmPhyIfOFC OID value, configure state conditions and alerts, and monitor any Cisco Metro Ethernet / DWDM optical switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.69 | ciscoMetroPhyMIB | CISCO-METRO-PHY-MIB |
| 1.3.6.1.4.1.9.10.69.1 | ciscoMetroPhyMIBObjects | CISCO-METRO-PHY-MIB |
| 1.3.6.1.4.1.9.10.69.1.1 | cmPhyIf | CISCO-METRO-PHY-MIB |
| 1.3.6.1.4.1.9.10.69.1.1.1 | cmPhyIfTable | CISCO-METRO-PHY-MIB |
| 1.3.6.1.4.1.9.10.69.1.1.1.1 | cmPhyIfEntry | CISCO-METRO-PHY-MIB |
| 1.3.6.1.4.1.9.10.69.1.1.1.1.6 | cmPhyIfOFC | CISCO-METRO-PHY-MIB |