All MIBs › CISCO-METRO-PHY-MIB › cmPhyIfLoopback
cmPhyIfLoopback
Module: CISCO-METRO-PHY-MIB
OID (symbolic): CISCO-METRO-PHY-MIB::cmPhyIfLoopback
OID (numeric): 1.3.6.1.4.1.9.10.69.1.1.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object allows the management client to configure loopback for the client side or trunk side interfaces.
'noLoop' - No Loopback present. 'diagnosticLoop' - This is an internal loopback, where the data stream is looped from the transmit to receive section. It is used for hardware debug, bring-up and diagnostics. 'lineLoop' - In this mode, the receive data stream is looped back to the transmit side. 'otherLoop' - This indicates loopbacks not defined here.
The default value of this object will be 'noLoop'.
What is cmPhyIfLoopback?
A read-write control that configures the loopback mode (e.g., no loopback or internal diagnostic loopback) on a client-side or trunk-side physical interface for testing purposes.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.69.1.1.1.1.5 snmpwalk -v2c -c public <target> CISCO-METRO-PHY-MIB::cmPhyIfLoopback
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.69.1.1.1.1.5.1 snmpget -v2c -c public <target> CISCO-METRO-PHY-MIB::cmPhyIfLoopback.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.69.1.1.1.1.5.1 i <value>
Start monitoring Cisco Metro Ethernet / DWDM optical switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-METRO-PHY-MIB::cmPhyIfLoopback OID value, configure state conditions and alerts, and monitor any Cisco Metro Ethernet / DWDM optical switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.69 | ciscoMetroPhyMIB | CISCO-METRO-PHY-MIB |
| 1.3.6.1.4.1.9.10.69.1 | ciscoMetroPhyMIBObjects | CISCO-METRO-PHY-MIB |
| 1.3.6.1.4.1.9.10.69.1.1 | cmPhyIf | CISCO-METRO-PHY-MIB |
| 1.3.6.1.4.1.9.10.69.1.1.1 | cmPhyIfTable | CISCO-METRO-PHY-MIB |
| 1.3.6.1.4.1.9.10.69.1.1.1.1 | cmPhyIfEntry | CISCO-METRO-PHY-MIB |
| 1.3.6.1.4.1.9.10.69.1.1.1.1.5 | cmPhyIfLoopback | CISCO-METRO-PHY-MIB |