CISCO-LWAPP-WLAN-POLICY-MIB :: cLWlanPolicyUserIdleThreshold

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-LWAPP-WLAN-POLICY-MIBcLWlanPolicyUserIdleThreshold

cLWlanPolicyUserIdleThreshold

Module: CISCO-LWAPP-WLAN-POLICY-MIB

OID (symbolic): CISCO-LWAPP-WLAN-POLICY-MIB::cLWlanPolicyUserIdleThreshold

OID (numeric): 1.3.6.1.4.1.9.9.853.1.2.1.1.37

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This object specifies a threshold triggered timeout where if a client has not sent a threshold quota of data within the specified user idle timeout, the client is considered to be inactive and is deauthenticated. If the data sent by the client is more than the threshold quota specified within the user idle timeout, the client is considered to be active and the controller refreshes for another timeout period. If the threshold quota is exhausted within the timeout period, the timeout period is refreshed.

What is cLWlanPolicyUserIdleThreshold?

Sets a data-volume threshold used with the user idle timeout: if a client sends less than this amount of data within the idle timeout period, it is deemed inactive and deauthenticated.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.853.1.2.1.1.37
snmpwalk -v2c -c public <target> CISCO-LWAPP-WLAN-POLICY-MIB::cLWlanPolicyUserIdleThreshold

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.853.1.2.1.1.37.1
snmpget -v2c -c public <target> CISCO-LWAPP-WLAN-POLICY-MIB::cLWlanPolicyUserIdleThreshold.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.853.1.2.1.1.37.1 i <value>

Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-WLAN-POLICY-MIB::cLWlanPolicyUserIdleThreshold OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.853ciscoCapwapWlanPolicyMIBCISCO-LWAPP-WLAN-POLICY-MIB
1.3.6.1.4.1.9.9.853.1ciscoLwappWlanPolicyMIBObjectsCISCO-LWAPP-WLAN-POLICY-MIB
1.3.6.1.4.1.9.9.853.1.2ciscoLwappWlanPolicyConfigCISCO-LWAPP-WLAN-POLICY-MIB
1.3.6.1.4.1.9.9.853.1.2.1cLWlanPolicyConfigTableCISCO-LWAPP-WLAN-POLICY-MIB
1.3.6.1.4.1.9.9.853.1.2.1.1cLWlanPolicyConfigEntryCISCO-LWAPP-WLAN-POLICY-MIB
1.3.6.1.4.1.9.9.853.1.2.1.1.37cLWlanPolicyUserIdleThresholdCISCO-LWAPP-WLAN-POLICY-MIB